5 open source boards using the AP62300TWU

Real designs built with the AP62300TWU, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

The AP62300TWU in open source designs

The gallery holds 5 open source boards using the AP62300TWU from 5 GitHub repositories; a typical one measures about 86 × 70 mm and carries around 116 components.

80% use four copper layers or more, and 60% carry an open source license.

The most starred is Brickpico by tjko.

Microcontrollers on boards using the AP62300TWU

AP62300TWU: common questions

Where can I find a AP62300TWU reference design?

Each of the 5 boards on this page is a real design using the AP62300TWU. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the AP62300TWU use?

Most are built on Raspberry Pi (1), RP2040/RP2350 (1) and STM32 (1).

How big is a typical board using the AP62300TWU?

The median is 86 × 70 mm, and 20% are two-layer designs.

What is the most popular open source board using the AP62300TWU?

By GitHub stars, Brickpico by tjko, with 18 stars.

Can I simulate one of these boards using the AP62300TWU before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part