10 open source boards using the APA102

Real designs built with the APA102, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

10 boardsClear filters|Most starred

How designs wire the APA102

Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the APA102 connects to, and the resistors, capacitors and other passives placed on it.

  • Pin 3 is tied to GND on 8 of 9 designs.
  • Pin 4 is tied to 5V on 8 of 9 designs.
Pin 3Connected to: GND 89%
Pin 4Connected to: 5V 89%
  • Decoupling capacitor on 33% · 100 nF (3)

4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Ww by blakesmith, Ultim8x8 by wyolum, Micropad by blakesmith and KlokTHREEjr by wyolum.

The APA102 in open source designs

The gallery holds 10 open source boards using the APA102 from 9 GitHub repositories; a typical one measures about 101.9 × 57.1 mm and carries around 69 components.

100% are two-layer designs, the rest use four layers or more, and 30% carry an open source license.

The most starred is Ww by blakesmith.

Microcontrollers on boards using the APA102

APA102: common questions

Where can I find a APA102 reference design?

Each of the 10 boards on this page is a real design using the APA102. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the APA102 pin 3 connected?

Pin 3 is tied to GND on 8 of 9 designs. Counted from the KiCad layouts of 9 open source designs using the APA102.

How is the APA102 pin 4 connected?

Pin 4 is tied to 5V on 8 of 9 designs. Counted from the KiCad layouts of 9 open source designs using the APA102.

What parts are used alongside the APA102?

The 1117-33, CP2102N-A01-GQFN28, DS3231N and ESP-WROOM-32 appear in the most repositories here.

Which microcontrollers do boards using the APA102 use?

Most are built on Microchip SAM (3), ESP32 (2), STM32 (2) and AVR/Arduino (1).

How big is a typical board using the APA102?

The median is 101.9 × 57.1 mm, and 100% are two-layer designs.

What is the most popular open source board using the APA102?

By GitHub stars, Ww by blakesmith, with 167 stars.

Can I simulate one of these boards using the APA102 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part