5 open source boards using the APS6404L-3SQN-SN
Real designs built with the APS6404L-3SQN-SN, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Pico2-ice
tinyvision-ai-inc
27.9 × 63.5 mm97 parts4LMIT59RP2040/RP2350
Pico Pocket386
HeathenUK
65.6 × 41.4 mm17 parts2LNo license4RP2040/RP2350
Rp2350-boards
abzman
21 × 66.9 mm62 parts2LUnlicense1RP2040/RP2350
Pico2-ice
frohro
27.9 × 63.5 mm97 parts4LMIT0PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800
How designs wire the APS6404L-3SQN-SN
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the APS6404L-3SQN-SN connects to, and the resistors, capacitors and other passives placed on it.
- The CE pin has a pull-up to 3.3V on 3 of 5 designs, most often 10 kΩ.
- The VCC pin has a decoupling capacitor on 3 of 5 designs, most often 100 nF (then 1 µF).
- The CE pin has a series resistor on 2 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| CEpin 1 | Connected to: The microcontroller 80% |
|
| VSSpin 4 | Connected to: GND 100% | — |
| VCCpin 8 | Connected to: 3.3V 100% |
|
5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include PicoGUS Hand386 by polpo, Pico2-ice by tinyvision-ai-inc, Pico Pocket386 by HeathenUK and Rp2350-boards by abzman.
The APS6404L-3SQN-SN in open source designs
The gallery holds 5 open source boards using the APS6404L-3SQN-SN from 5 GitHub repositories; a typical one measures about 27.9 × 63.5 mm and carries around 62 components.
60% use four copper layers or more, and 80% carry an open source license.
The most starred is PicoGUS Hand386 by polpo.
Parts used alongside the APS6404L-3SQN-SN
Microcontrollers on boards using the APS6404L-3SQN-SN
What boards using the APS6404L-3SQN-SN are built for
APS6404L-3SQN-SN: common questions
Where can I find a APS6404L-3SQN-SN reference design?
Each of the 5 boards on this page is a real design using the APS6404L-3SQN-SN. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the APS6404L-3SQN-SN CE pin?
The CE pin has a pull-up to 3.3V on 3 of 5 designs, most often 10 kΩ. Counted from the KiCad layouts of 5 open source designs using the APS6404L-3SQN-SN.
What decoupling capacitors do designs use on the APS6404L-3SQN-SN VCC pin?
The VCC pin has a decoupling capacitor on 3 of 5 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the APS6404L-3SQN-SN.
What parts are used alongside the APS6404L-3SQN-SN?
The 74AHC14, 74FST3257DR2G, 74LVC00, 74LVC1G00 and 74LVC1G06 appear in the most repositories here.
Which microcontrollers do boards using the APS6404L-3SQN-SN use?
Most are built on RP2040/RP2350 (4).
How big is a typical board using the APS6404L-3SQN-SN?
The median is 27.9 × 63.5 mm, and 40% are two-layer designs.
What is the most popular open source board using the APS6404L-3SQN-SN?
By GitHub stars, PicoGUS Hand386 by polpo, with 800 stars.
Can I simulate one of these boards using the APS6404L-3SQN-SN before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.