9 open source boards using the 74LVC1G06
Real designs built with the 74LVC1G06, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
PIC
QI Charger
drewsum
150 × 50 mm293 parts2LNo license20RP2040/RP2350
Pico Pocket386
HeathenUK
65.6 × 41.4 mm17 parts2LNo license4RP2040/RP2350
Karabas go
andykarpov
101.6 × 147.3 mm279 parts4LCC-BY-NC-4.02NoCIC
hkzlab
9.5 × 20.6 mm15 parts2LCC-BY-NC-4.02PS28 CORE B - SELECTED - CASE FIT UNMEASURED
bernardopg
154 × 81 mm203 parts4LNo license1USB 2.0 Smart 4 port hub on GL852
shworker
100 × 100 mm100 parts2LNo license0STM32
INV Discrete Controller
NTURacingTeam
100 × 100 mm351 parts4LNo license0PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800MemBird - Woodcock
transistorfet
100 × 100 mm48 parts4LMIT17
How designs wire the 74LVC1G06
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the 74LVC1G06 connects to, and the resistors, capacitors and other passives placed on it.
- Pin 1 is left unconnected on 9 of 9 designs.
- The VCC pin has a decoupling capacitor on 5 of 9 designs, most often 100 nF (then 47 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: Not connected 100% | — |
| GNDpin 3 | Connected to: GND 100% | — |
| Pin 4 | Connected to: A connector 44% |
|
| VCCpin 5 | Connected to: 3.3V 89% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include PicoGUS Hand386 by polpo, QI Charger by drewsum, MemBird - Woodcock by transistorfet and Pico Pocket386 by HeathenUK.
The 74LVC1G06 in open source designs
The gallery holds 9 open source boards using the 74LVC1G06 from 9 GitHub repositories; a typical one measures about 100 × 81 mm and carries around 100 components.
56% use four copper layers or more, and 22% carry an open source license.
The most starred is PicoGUS Hand386 by polpo.
Parts used alongside the 74LVC1G06
Microcontrollers on boards using the 74LVC1G06
What boards using the 74LVC1G06 are built for
74LVC1G06: common questions
Where can I find a 74LVC1G06 reference design?
Each of the 9 boards on this page is a real design using the 74LVC1G06. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 74LVC1G06 pin 1 connected?
Pin 1 is left unconnected on 9 of 9 designs. Counted from the KiCad layouts of 9 open source designs using the 74LVC1G06.
What decoupling capacitors do designs use on the 74LVC1G06 VCC pin?
The VCC pin has a decoupling capacitor on 5 of 9 designs, most often 100 nF (then 47 µF). Counted from the KiCad layouts of 9 open source designs using the 74LVC1G06.
What parts are used alongside the 74LVC1G06?
The 74AHC14, 74FST3257DR2G, 74LVC00, 74LVC1G00 and 74LVC1G07 appear in the most repositories here.
Which microcontrollers do boards using the 74LVC1G06 use?
Most are built on RP2040/RP2350 (2), PIC (1) and STM32 (1).
How big is a typical board using the 74LVC1G06?
The median is 100 × 81 mm, and 44% are two-layer designs.
What is the most popular open source board using the 74LVC1G06?
By GitHub stars, PicoGUS Hand386 by polpo, with 800 stars.
Can I simulate one of these boards using the 74LVC1G06 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.