14 open source boards using the 74LVC1G00
Real designs built with the 74LVC1G00, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Videopaccart
bwack
99.6 × 101.5 mm23 parts2LNo license6RP2040/RP2350
Pico Pocket386
HeathenUK
65.6 × 41.4 mm17 parts2LNo license4ESP32
Atlas carrier ctrl
md-sazzad-eee
130 × 100 mm145 parts4LNo license0AVR/Arduino
Atmega328-enclosure tamper alarm
manhoosbilli1
100 × 60 mm83 parts2LNo license0Swallow board io sdram
swallow-project
30 × 140 mm45 parts2LCC-BY-4.00FPGA
HL2 Filter Board
softerhardware
100 × 49.9 mm112 parts4LNo license372RP2040/RP2350
PicoGUS
polpo
103.7 × 74.1 mm46 parts2LGPL-2.0800VGA
John-Lluch
150 × 80 mm107 parts4LNo license10Cft ctl
alexiosc
131.9 × 164.6 mm195 parts4LGPL-3.06PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Cft ctl dip
alexiosc
131.9 × 164.6 mm195 parts4LGPL-3.06Cft front panel-20190912-all modules
alexiosc
99.7 × 143.4 mm122 parts2LGPL-3.06Rs485 board
mekatrol
24.1 × 22.1 mm12 parts2LNo license0Repeater
lucanastasio
55 × 35 mm41 parts2LNo license1
How designs wire the 74LVC1G00
Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the 74LVC1G00 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 6 of 10 designs, most often 100 nF (then 22 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 3 | Connected to: GND 100% | — |
| VCCpin 5 | Connected to: 3.3V 100% |
|
3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include PicoGUS by polpo, HL2 Filter Board by softerhardware, VGA by John-Lluch and Cft ctl by alexiosc.
The 74LVC1G00 in open source designs
The gallery holds 14 open source boards using the 74LVC1G00 from 11 GitHub repositories; a typical one measures about 99.8 × 77.6 mm and carries around 65 components.
57% are two-layer designs, the rest use four layers or more, and 43% carry an open source license.
The most starred is PicoGUS by polpo.
Parts used alongside the 74LVC1G00
Microcontrollers on boards using the 74LVC1G00
What boards using the 74LVC1G00 are built for
74LVC1G00: common questions
Where can I find a 74LVC1G00 reference design?
Each of the 14 boards on this page is a real design using the 74LVC1G00. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74LVC1G00 VCC pin?
The VCC pin has a decoupling capacitor on 6 of 10 designs, most often 100 nF (then 22 nF). Counted from the KiCad layouts of 11 open source designs using the 74LVC1G00.
What parts are used alongside the 74LVC1G00?
The 74AC161, 74AHC14, 74FST3257DR2G, 74LVC00 and 74LVC1G06 appear in the most repositories here.
Which microcontrollers do boards using the 74LVC1G00 use?
Most are built on AVR/Arduino (2), RP2040/RP2350 (2), ESP32 (1) and FPGA (1).
How big is a typical board using the 74LVC1G00?
The median is 99.8 × 77.6 mm, and 57% are two-layer designs.
What is the most popular open source board using the 74LVC1G00?
By GitHub stars, PicoGUS by polpo, with 800 stars.
Can I simulate one of these boards using the 74LVC1G00 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.