3 open source boards using the NCP115AMX330TCG

Real designs built with the NCP115AMX330TCG, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The NCP115AMX330TCG in open source designs

The gallery holds 3 open source boards using the NCP115AMX330TCG from 3 GitHub repositories; a typical one measures about 27.9 × 63.5 mm and carries around 97 components.

100% use four copper layers or more, and 100% carry an open source license.

The most starred is ReDIP-CIA by daglem.

Microcontrollers on boards using the NCP115AMX330TCG

What boards using the NCP115AMX330TCG are built for

NCP115AMX330TCG: common questions

Where can I find a NCP115AMX330TCG reference design?

Each of the 3 boards on this page is a real design using the NCP115AMX330TCG. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the NCP115AMX330TCG?

The NCP115AMX120TCG, APS6404L-3SQN-SN, ICE40UP5K-SG48I, RP2350_80QFN and TL431DBZ appear in the most repositories here.

Which microcontrollers do boards using the NCP115AMX330TCG use?

Most are built on RP2040/RP2350 (2) and FPGA (1).

How big is a typical board using the NCP115AMX330TCG?

The median is 27.9 × 63.5 mm, and 0% are two-layer designs.

What is the most popular open source board using the NCP115AMX330TCG?

By GitHub stars, ReDIP-CIA by daglem, with 64 stars.

Can I simulate one of these boards using the NCP115AMX330TCG before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part