12 open source boards using the AS5600-ASOT

Real designs built with the AS5600-ASOT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

12 boardsClear filters|Most starred

How designs wire the AS5600-ASOT

Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the AS5600-ASOT connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD5V pin has a decoupling capacitor on 7 of 11 designs, most often 100 nF (then 10 µF).
  • The VDD3V3 pin has a decoupling capacitor on 7 of 11 designs, most often 100 nF (then 10 µF).
  • The SDA pin has a pull-up to 3.3V on 6 of 11 designs, most often 4.7 kΩ (then 10 kΩ).
  • The SCL pin has a pull-up to 3.3V on 6 of 10 designs, most often 4.7 kΩ (then 10 kΩ).
VDD5Vpin 1Connected to: 3.3V 82%
  • Decoupling capacitor on 64% · 100 nF (5), 10 µF (2)
VDD3V3pin 2Connected to: 3.3V 91%
  • Decoupling capacitor on 64% · 100 nF (5), 10 µF (2)
GNDpin 4Connected to: GND 91%
PGOpin 5Connected to: Not connected 64% · GND 27%
SDApin 6Connected to: The microcontroller 45% · not connected 36%
  • Pull-up to 3.3V on 55% · 4.7 kΩ (3), 10 kΩ (3)
SCLpin 7Connected to: The microcontroller 50%, a connector 20% · not connected 30%
  • Pull-up to 3.3V on 60% · 4.7 kΩ (3), 10 kΩ (3)

2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include As5600 adapter by UofA-SPEAR, Macro-Keyboard v4 by NikolasKelava, Kronos-Hardware by AddeyX and BLDC by banbatakumi.

The AS5600-ASOT in open source designs

The gallery holds 12 open source boards using the AS5600-ASOT from 12 GitHub repositories; a typical one measures about 50 × 31 mm and carries around 44 components.

55% are two-layer designs, the rest use four layers or more, and 42% carry an open source license.

The most starred is As5600 adapter by UofA-SPEAR.

Microcontrollers on boards using the AS5600-ASOT

AS5600-ASOT: common questions

Where can I find a AS5600-ASOT reference design?

Each of the 12 boards on this page is a real design using the AS5600-ASOT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the AS5600-ASOT VDD5V pin?

The VDD5V pin has a decoupling capacitor on 7 of 11 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 11 open source designs using the AS5600-ASOT.

What decoupling capacitors do designs use on the AS5600-ASOT VDD3V3 pin?

The VDD3V3 pin has a decoupling capacitor on 7 of 11 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 11 open source designs using the AS5600-ASOT.

What pull-up resistor is used on the AS5600-ASOT SDA pin?

The SDA pin has a pull-up to 3.3V on 6 of 11 designs, most often 4.7 kΩ (then 10 kΩ). Counted from the KiCad layouts of 11 open source designs using the AS5600-ASOT.

Which microcontrollers do boards using the AS5600-ASOT use?

Most are built on ESP32 (3), STM32 (2), AVR/Arduino (1) and Nordic nRF (1).

How big is a typical board using the AS5600-ASOT?

The median is 50 × 31 mm, and 55% are two-layer designs.

What is the most popular open source board using the AS5600-ASOT?

By GitHub stars, As5600 adapter by UofA-SPEAR, with 3 stars.

Can I simulate one of these boards using the AS5600-ASOT before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part