7 open source boards using the ATSAMD21E18A

Real designs built with the ATSAMD21E18A, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the ATSAMD21E18A

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the ATSAMD21E18A connects to, and the resistors, capacitors and other passives placed on it.

  • The VDDCORE pin has a capacitor to GND on 5 of 5 designs, most often 1 µF.
  • The PA00 pin is left unconnected on 5 of 5 designs.
  • The PA01 pin is left unconnected on 5 of 5 designs.
  • The PA03 pin is left unconnected on 5 of 5 designs.
PA00pin 1Connected to: Not connected 100%
PA01pin 2Connected to: Not connected 100%
PA02pin 3Connected to: Not connected 60% · a signal 40%
PA03pin 4Connected to: Not connected 100%
VDDApin 9Connected to: 3.3V 100%
  • Decoupling capacitor on 80% · 100 nF (4), 10 µF (2)
GNDpin 10, 28Connected to: GND 100%
PA10pin 13Connected to: Not connected 60% · a signal 40%
PA11pin 14Connected to: Not connected 60% · a signal 40%
PA14pin 15Connected to: Not connected 60% · a signal 40%
PA15pin 16Connected to: Not connected 60% · a signal 40%
PA22pin 21Connected to: Not connected 60% · a signal 40%
  • Series resistor on 40% · 360 Ω (2)
PA23pin 22Connected to: Not connected 60% · a signal 40%
PA27pin 25Connected to: Not connected 80% · a signal 20%
PA28pin 27Connected to: Not connected 80% · a signal 20%
VDDCOREpin 29Connected to: Signal 80% · VDDCORE 20%
  • Capacitor to GND on 100% · 1 µF (5)
VDDpin 30Connected to: 3.3V 100%
  • Decoupling capacitor on 80% · 100 nF (5), 10 µF (1)
SWCLKpin 31Connected to: A connector 40%
  • Pull-up to 3.3V on 40% · 1 kΩ (2)
Pin 33Connected to: Not connected 67% · GND 33%

14 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include NFC-Copy-Cat by ElectronicCats, Serpente by arturo182, Game and watch swd implant by UlfWetzker and Cap sense ctrl by gregdavill.

The ATSAMD21E18A in open source designs

The gallery holds 7 open source boards using the ATSAMD21E18A from 5 GitHub repositories; a typical one measures about 29.5 × 22 mm and carries around 20 components.

83% are two-layer designs, the rest use four layers or more, and 86% carry an open source license.

The most starred is NFC-Copy-Cat by ElectronicCats.

Parts used alongside the ATSAMD21E18A

Microcontrollers on boards using the ATSAMD21E18A

ATSAMD21E18A: common questions

Where can I find a ATSAMD21E18A reference design?

Each of the 7 boards on this page is a real design using the ATSAMD21E18A. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the ATSAMD21E18A VDDCORE pin connected?

The VDDCORE pin has a capacitor to GND on 5 of 5 designs, most often 1 µF. Counted from the KiCad layouts of 5 open source designs using the ATSAMD21E18A.

How is the ATSAMD21E18A PA00 pin connected?

The PA00 pin is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the ATSAMD21E18A.

How is the ATSAMD21E18A PA01 pin connected?

The PA01 pin is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the ATSAMD21E18A.

Which microcontrollers do boards using the ATSAMD21E18A use?

Most are built on Microchip SAM (7).

How big is a typical board using the ATSAMD21E18A?

The median is 29.5 × 22 mm, and 83% are two-layer designs.

What is the most popular open source board using the ATSAMD21E18A?

By GitHub stars, NFC-Copy-Cat by ElectronicCats, with 148 stars.

Can I simulate one of these boards using the ATSAMD21E18A before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part