12 open source boards using the ATtiny1614-SS
Real designs built with the ATtiny1614-SS, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
DiyBMS-CurrentShunt
stuartpittaway
90 × 72 mm45 parts2LCC-BY-NC-4.060AVR/Arduino
CollectorPanel
tjhiker
157.5 × 81.3 mm22 parts2LNo license7ESP8266
ESP Attiny 1614
tomtor
33.1 × 23.9 mm18 parts2LGPL-3.04- schematic only · 15 partsAVR/Arduino
DC34 Main Badge Fuzzer SAO
NilbinSec
15 partsNo license4 AVR/Arduino
SB Pixel Count
computergeek1507
53.5 × 26.5 mm18 parts2LNo license3AVR/Arduino
Z180 motherboard
Hyiger-Designs
112.8 × 51.7 mm26 parts2LNo license2RP2040/RP2350
DualPreRegPowerSupply
janni0609
99.6 × 100 mm351 parts4LNo license0AVR/Arduino
PID Board
AaronDoubert
250 × 100 mm218 parts2LNo license0AVR/Arduino
Night light
camerongillingham93
85 × 85 mm40 parts2LNo license0AVR/Arduino
PCB-Power-Blink
annaastrs-svg
52 × 44 mm29 parts2LNo license0RP2040/RP2350
MainBoard
connorfcruz
65.3 × 50.3 mm18 parts2LMIT0AVR/Arduino
Serial number
PurkkaKoodari
80 × 36.6 mm26 parts2LMIT2
How designs wire the ATtiny1614-SS
Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the ATtiny1614-SS connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 8 of 11 designs, most often 100 nF (then 22 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VCCpin 1 | Connected to: 3.3V 91% |
|
| PB0pin 9 | Connected to: Signal 73% · not connected 27% |
|
| GNDpin 14 | Connected to: GND 91% | — |
11 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include DiyBMS-CurrentShunt by stuartpittaway, CollectorPanel by tjhiker, ESP Attiny 1614 by tomtor and SB Pixel Count by computergeek1507.
The ATtiny1614-SS in open source designs
The gallery holds 12 open source boards using the ATtiny1614-SS from 12 GitHub repositories; a typical one measures about 85 × 51.7 mm and carries around 26 components.
91% are two-layer designs, the rest use four layers or more, and 25% carry an open source license.
The most starred is DiyBMS-CurrentShunt by stuartpittaway.
Microcontrollers on boards using the ATtiny1614-SS
What boards using the ATtiny1614-SS are built for
ATtiny1614-SS: common questions
Where can I find a ATtiny1614-SS reference design?
Each of the 12 boards on this page is a real design using the ATtiny1614-SS. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the ATtiny1614-SS VCC pin?
The VCC pin has a decoupling capacitor on 8 of 11 designs, most often 100 nF (then 22 µF). Counted from the KiCad layouts of 11 open source designs using the ATtiny1614-SS.
Which microcontrollers do boards using the ATtiny1614-SS use?
Most are built on AVR/Arduino (9), RP2040/RP2350 (2) and ESP8266 (1).
How big is a typical board using the ATtiny1614-SS?
The median is 85 × 51.7 mm, and 91% are two-layer designs.
What is the most popular open source board using the ATtiny1614-SS?
By GitHub stars, DiyBMS-CurrentShunt by stuartpittaway, with 60 stars.
Can I simulate one of these boards using the ATtiny1614-SS before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.