6 open source boards using the C2456297
Real designs built with the C2456297, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
RP2040-DebugProbe
red-scorp
50.8 × 25.4 mm66 parts4LNo license8RP2040/RP2350
RP2040-ProMini
red-scorp
17.8 × 41.9 mm44 parts4LNo license8RP2040/RP2350
RP2040-Eins
red-scorp
68.6 × 53.3 mm64 parts4LNo license3RP2040/RP2350
RP2040-PicoProbe
red-scorp
27.9 × 13.2 mm40 parts4LNo license3RP2040/RP2350
RP2040-MicroProbe
red-scorp
39.4 × 17.8 mm47 parts4LNo license2GD32
GD32F450-devboard
AYUSH-pro-grammer
111.5 × 72 mm81 parts4LNo license0
How designs wire the C2456297
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the C2456297 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 2.2 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 4 | Connected to: GND 100% | — |
| VCCpin 8 | Connected to: 3.3V 100% |
|
| EPpin 9 | Connected to: GND 83% · not connected 17% | — |
6 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include RP2040-DebugProbe by red-scorp, RP2040-ProMini by red-scorp, RP2040-Eins by red-scorp and RP2040-PicoProbe by red-scorp.
The C2456297 in open source designs
The gallery holds 6 open source boards using the C2456297 from 6 GitHub repositories; a typical one measures about 45.1 × 33.7 mm and carries around 56 components.
100% use four copper layers or more, and 0% carry an open source license.
The most starred is RP2040-DebugProbe by red-scorp.
Parts used alongside the C2456297
Microcontrollers on boards using the C2456297
What boards using the C2456297 are built for
C2456297: common questions
Where can I find a C2456297 reference design?
Each of the 6 boards on this page is a real design using the C2456297. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the C2456297 VCC pin?
The VCC pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 2.2 µF). Counted from the KiCad layouts of 6 open source designs using the C2456297.
What parts are used alongside the C2456297?
The C2040, W25Q128JVS, C2652100, C37970 and C6187 appear in the most repositories here.
Which microcontrollers do boards using the C2456297 use?
Most are built on RP2040/RP2350 (5) and GD32 (1).
How big is a typical board using the C2456297?
The median is 45.1 × 33.7 mm, and 0% are two-layer designs.
What is the most popular open source board using the C2456297?
By GitHub stars, RP2040-DebugProbe by red-scorp, with 8 stars.
Can I simulate one of these boards using the C2456297 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.