14 open source boards using the TL072CP
Real designs built with the TL072CP, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
GuitarAmplifier-PCB-IE0308
RoMadrigal
158.5 × 57 mm33 parts4LMIT3Twangilizer
shannon-greenlight
101.3 × 110 mm454 parts4LNo license1AVR/Arduino
The Spankulator
shannon-greenlight
60.4 × 110 mm100 parts4LNo license1Yellow fuzz
ersatzavian
121.9 × 149.9 mm164 parts2LNo license0ESP32
EE344 Electronic Design lab
Amolpagare10
153.2 × 122.3 mm108 parts2LNo license0Cambridge reverb
jcfurey
190 × 115 mm85 parts2LNo license0Effect pedal
Ahreo
104.8 × 97.8 mm85 parts2LNo license0STM32
Rng piHAT
akielaries
56.5 × 65 mm53 parts2LNo license0STM32
PI-metal detector
ardad2088
105.7 × 82.2 mm49 parts2LNo license0!!UNTESTED!!
niektb
50.5 × 128.5 mm124 parts2LCC-BY-SA-4.034Pipes main
shannon-greenlight
70.8 × 110 mm207 parts4LNo license2Yellow fuzz dev
ersatzavian
121.9 × 149.9 mm164 parts2LNo license0Cambridge reverb smd
jcfurey
155 × 90 mm85 parts2LNo license02044vcf
ijnekenamay
30 × 100 mm31 parts2LNo license143
How designs wire the TL072CP
Read from the KiCad layouts of 12 open source designs, one per repository: what each pin of the TL072CP connects to, and the resistors, capacitors and other passives placed on it.
- The - pins have a series resistor on 11 of 12 designs, most often 100 kΩ (then 10 kΩ).
- The 1OUT pin has a series resistor on 9 of 12 designs, most often 100 kΩ (then 1 kΩ).
- The 2OUT pin has a series resistor on 7 of 12 designs, most often 100 kΩ (then 10 kΩ).
- The V+ pin has a decoupling capacitor on 6 of 12 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| 1OUTpin 1 | Connected to: Signal 92% |
|
| -pin 2, 6 | Connected to: Signal 88% |
|
| +pin 3, 5 | Connected to: Signal 71% · GND 17% |
|
| 2OUTpin 7 | Connected to: Signal 75% · not connected 17% |
|
| V+pin 8 | Connected to: 12V 83% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 2044vcf by ijnekenamay, !!UNTESTED!! by niektb, GuitarAmplifier-PCB-IE0308 by RoMadrigal and Pipes main by shannon-greenlight.
The TL072CP in open source designs
The gallery holds 14 open source boards using the TL072CP from 12 GitHub repositories; a typical one measures about 105.2 × 110 mm and carries around 93 components.
71% are two-layer designs, the rest use four layers or more, and 14% carry an open source license.
The most starred is 2044vcf by ijnekenamay.
Parts used alongside the TL072CP
Microcontrollers on boards using the TL072CP
What boards using the TL072CP are built for
TL072CP: common questions
Where can I find a TL072CP reference design?
Each of the 14 boards on this page is a real design using the TL072CP. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the TL072CP - pin?
The - pins have a series resistor on 11 of 12 designs, most often 100 kΩ (then 10 kΩ). Counted from the KiCad layouts of 12 open source designs using the TL072CP.
What resistor goes on the TL072CP 1OUT pin?
The 1OUT pin has a series resistor on 9 of 12 designs, most often 100 kΩ (then 1 kΩ). Counted from the KiCad layouts of 12 open source designs using the TL072CP.
What resistor goes on the TL072CP 2OUT pin?
The 2OUT pin has a series resistor on 7 of 12 designs, most often 100 kΩ (then 10 kΩ). Counted from the KiCad layouts of 12 open source designs using the TL072CP.
What parts are used alongside the TL072CP?
The CD4017, CD4046, LM317_SOT-223 and MCP6002-I/P appear in the most repositories here.
Which microcontrollers do boards using the TL072CP use?
Most are built on STM32 (2), AVR/Arduino (1) and ESP32 (1).
How big is a typical board using the TL072CP?
The median is 105.2 × 110 mm, and 71% are two-layer designs.
What is the most popular open source board using the TL072CP?
By GitHub stars, 2044vcf by ijnekenamay, with 143 stars.
Can I simulate one of these boards using the TL072CP before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.