6 open source boards using the CD4040
Real designs built with the CD4040, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Peoples permacomputer
genossen
208.3 × 146.1 mm121 parts2LCustom license2V2
durangoretro
177.8 × 130.8 mm148 parts2LNo license0RainGauge ST Morpho Shield V1.2
alexandreberg
84 × 84.5 mm47 parts2LAGPL-3.00V2-eia
durangoretro
177.8 × 130.8 mm148 parts2LNo license0PLL
telec16
50 × 200 mm78 parts2LNo license16Vdu sv
zuiko21
106.7 × 83.8 mm35 parts2LMIT23
How designs wire the CD4040
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the CD4040 connects to, and the resistors, capacitors and other passives placed on it.
- The Q11 pin is left unconnected on 5 of 5 designs.
- The Q10 pin is left unconnected on 5 of 5 designs.
- The Q9 pin is left unconnected on 4 of 5 designs.
- The RESET pin has a resistor to GND on 2 of 5 designs, most often 100 kΩ (then 10 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Q11pin 1 | Connected to: Not connected 100% | — |
| VSSpin 8 | Connected to: GND 100% | — |
| RESETpin 11 | Connected to: 74HC21 40%, a connector 40% |
|
| Q9pin 14 | Connected to: Not connected 80% · a signal 20% | — |
| Q10pin 15 | Connected to: Not connected 100% | — |
| VDDpin 16 | Connected to: 5V 80% · a signal 20% |
|
10 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Vdu sv by zuiko21, PLL by telec16, Peoples permacomputer by genossen and RainGauge ST Morpho Shield V1.2 by alexandreberg.
The CD4040 in open source designs
The gallery holds 6 open source boards using the CD4040 from 5 GitHub repositories; a typical one measures about 142.2 × 130.8 mm and carries around 100 components.
100% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is Vdu sv by zuiko21.
Parts used alongside the CD4040
What boards using the CD4040 are built for
CD4040: common questions
Where can I find a CD4040 reference design?
Each of the 6 boards on this page is a real design using the CD4040. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the CD4040 Q11 pin connected?
The Q11 pin is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the CD4040.
How is the CD4040 Q10 pin connected?
The Q10 pin is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the CD4040.
How is the CD4040 Q9 pin connected?
The Q9 pin is left unconnected on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the CD4040.
What parts are used alongside the CD4040?
The 62256, 74HC157, 74HC166, 74HC21 and 74HC245 appear in the most repositories here.
How big is a typical board using the CD4040?
The median is 142.2 × 130.8 mm, and 100% are two-layer designs.
What is the most popular open source board using the CD4040?
By GitHub stars, Vdu sv by zuiko21, with 23 stars.
Can I simulate one of these boards using the CD4040 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.