5 open source boards using the CD4094

Real designs built with the CD4094, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the CD4094

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the CD4094 connects to, and the resistors, capacitors and other passives placed on it.

  • The QS* pin is left unconnected on 5 of 5 designs.
  • The QS pin is left unconnected on 4 of 5 designs.
  • The VDD pin has a decoupling capacitor on 3 of 5 designs, most often 100 nF.
  • The OE pin is tied to 12V on 3 of 5 designs (a signal on 2).
STROBEpin 1Connected to: Signal 100%
  • Series capacitor on 40% · 100 pF (2)
  • Resistor to GND on 40% · 4.7 kΩ (1), 10 kΩ (1)
CLKpin 3Connected to: 40106 40%
  • Series resistor on 40% · 1 MΩ (2)
Q4pin 7Connected to: 40193 40%
  • Series resistor on 40% · 330 Ω (1), 4.7 kΩ (1)
VSSpin 8Connected to: GND 100%
QSpin 9Connected to: Not connected 80% · a signal 20%
QS*pin 10Connected to: Not connected 100%
OEpin 15Connected to: 12V 60% · a signal 40%
VDDpin 16Connected to: 12V 80% · a signal 20%
  • Decoupling capacitor on 60% · 100 nF (3)

8 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Servo Motor Shield v1 by cxxx1828, Sequencer by gehel, SoundLab16StepSequencer by JakeBoothy and E-Ink Dashbord by mlisak.

The CD4094 in open source designs

The gallery holds 5 open source boards using the CD4094 from 5 GitHub repositories; a typical one measures about 160 × 101.6 mm and carries around 120 components.

60% are two-layer designs, the rest use four layers or more, and 20% carry an open source license.

The most starred is Servo Motor Shield v1 by cxxx1828.

Parts used alongside the CD4094

Microcontrollers on boards using the CD4094

CD4094: common questions

Where can I find a CD4094 reference design?

Each of the 5 boards on this page is a real design using the CD4094. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the CD4094 QS* pin connected?

The QS* pin is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the CD4094.

How is the CD4094 QS pin connected?

The QS pin is left unconnected on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the CD4094.

What decoupling capacitors do designs use on the CD4094 VDD pin?

The VDD pin has a decoupling capacitor on 3 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the CD4094.

What parts are used alongside the CD4094?

The 40106, 4013, 40193, 4514 and CD74HC4067M appear in the most repositories here.

Which microcontrollers do boards using the CD4094 use?

Most are built on ESP8266 (1).

How big is a typical board using the CD4094?

The median is 160 × 101.6 mm, and 60% are two-layer designs.

What is the most popular open source board using the CD4094?

By GitHub stars, Servo Motor Shield v1 by cxxx1828, with 2 stars.

Can I simulate one of these boards using the CD4094 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part