12 open source boards using the CP2102-GM
Real designs built with the CP2102-GM, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
AiO-i2s-DAC
martinroger
58.8 × 55.8 mm86 parts2LMIT23Nordic nRF
Nrf52board
dimka-rs
27.9 × 59.7 mm40 parts2LNo license1ESP32
Robot Main Controller V3
manhtienvu-vn
130.5 × 91.1 mm123 parts2LNo license0ESP32
Filament dryer monitor
alessandrocardelli
91 × 52 mm94 parts4LNo license0AVR/Arduino
PORTABLE-ECG
jeis-aj
64.8 × 25.5 mm80 parts2LMIT0A1S Mini Board
martinroger
58.8 × 55.8 mm70 parts2LMIT23If chg board
elkel53930
62 × 26 mm39 parts2LMIT4Haut de Forme
martinroger
29.8 × 68.3 mm27 parts2LMIT23ESP32
Mainboard Layout No daisy chain
ReadHeadRedemption
207 × 174.8 mm87 parts2LNo license0ESP32
Mainboard Layout No daisy chain cp2102 moved
ReadHeadRedemption
207 × 174.8 mm87 parts2LNo license0ESP32
Mainboard layout Pre-16 pin SD module
ReadHeadRedemption
191.3 × 169.2 mm80 parts2LNo license0ESP32
Mainboard layout Daisy chain removed
ReadHeadRedemption
191.3 × 169.2 mm74 parts2LNo license0
How designs wire the CP2102-GM
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the CP2102-GM connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 10 µF).
- The CHREN pin is left unconnected on 6 of 6 designs.
- The CHR1 pin is left unconnected on 6 of 6 designs.
- The CHR0 pin is left unconnected on 6 of 6 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| DCDpin 1 | Connected to: Not connected 67% · a signal 33% | — |
| RI/CLKpin 2 | Connected to: Not connected 83% · a signal 17% | — |
| GNDpin 3, 29 | Connected to: GND 83% · not connected 17% | — |
| VDDpin 6 | Connected to: 3.3V 67% · a signal 33% |
|
| VREGINpin 7 | Connected to: 3.3V 100% |
|
| VBUSpin 8 | Connected to: Signal 67% · 5V 33% |
|
| RSTpin 9 | Connected to: Signal 83% · not connected 17% |
|
| NCpin 10 | Connected to: Not connected 100% | — |
| SUSPENDpin 11, 12 | Connected to: Not connected 67% · a signal 33% |
|
| CHRENpin 13 | Connected to: Not connected 100% | — |
| CHR1pin 14 | Connected to: Not connected 100% | — |
| CHR0pin 15 | Connected to: Not connected 100% | — |
| WAKEUP/GPIO.3pin 16 | Connected to: Not connected 100% | — |
| RS485/GPIO.2pin 17 | Connected to: Not connected 100% | — |
| RXT/GPIO.1pin 18 | Connected to: Not connected 100% | — |
| TXT/GPIO.0pin 19 | Connected to: Not connected 100% | — |
| GPIO.6pin 20 | Connected to: Not connected 100% | — |
| GPIO.5pin 21 | Connected to: Not connected 100% | — |
| GPIO.4pin 22 | Connected to: Not connected 100% | — |
| CTSpin 23 | Connected to: Not connected 67% · a signal 33% | — |
| RTSpin 24 | Connected to: Signal 67% · not connected 33% |
|
| DSRpin 27 | Connected to: Not connected 83% · a signal 17% | — |
| DTRpin 28 | Connected to: Signal 83% · not connected 17% |
|
4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include A1S Mini Board by martinroger, If chg board by elkel53930, Nrf52board by dimka-rs and Filament dryer monitor by alessandrocardelli.
The CP2102-GM in open source designs
The gallery holds 12 open source boards using the CP2102-GM from 7 GitHub repositories; a typical one measures about 77.9 × 64 mm and carries around 80 components.
92% are two-layer designs, the rest use four layers or more, and 42% carry an open source license.
The most starred is AiO-i2s-DAC by martinroger.
Microcontrollers on boards using the CP2102-GM
What boards using the CP2102-GM are built for
CP2102-GM: common questions
Where can I find a CP2102-GM reference design?
Each of the 12 boards on this page is a real design using the CP2102-GM. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the CP2102-GM VDD pin?
The VDD pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 6 open source designs using the CP2102-GM.
How is the CP2102-GM CHREN pin connected?
The CHREN pin is left unconnected on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the CP2102-GM.
How is the CP2102-GM CHR1 pin connected?
The CHR1 pin is left unconnected on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the CP2102-GM.
Which microcontrollers do boards using the CP2102-GM use?
Most are built on ESP32 (7), AVR/Arduino (1) and Nordic nRF (1).
How big is a typical board using the CP2102-GM?
The median is 77.9 × 64 mm, and 92% are two-layer designs.
What is the most popular open source board using the CP2102-GM?
By GitHub stars, AiO-i2s-DAC by martinroger, with 23 stars.
Can I simulate one of these boards using the CP2102-GM before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.