6 open source boards using the DAC7554IDGS
Real designs built with the DAC7554IDGS, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Plinkyblack hwmidi jacks
plinkysynth
121.9 × 109.2 mm261 parts4LMIT221STM32
Plinkyblack hwmidi jacks
ember-labs-io
121.9 × 109.2 mm261 parts4LCC-BY-SA-4.019Expander
plinkysynth
43.2 × 128.3 mm68 parts2LCC-BY-NC-4.019Expander just back
plinkysynth
20.3 × 104.3 mm59 parts2LCC-BY-NC-4.019Xyab
plinkysynth
43.2 × 128.3 mm68 parts2LMIT221Xyab
ember-labs-io
43.2 × 128.3 mm68 parts2LCC-BY-SA-4.019
The DAC7554IDGS in open source designs
The gallery holds 6 open source boards using the DAC7554IDGS from 3 GitHub repositories; a typical one measures about 43.2 × 118.7 mm and carries around 68 components.
67% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.
The most starred is Plinkyblack hwmidi jacks by plinkysynth.
Parts used alongside the DAC7554IDGS
Microcontrollers on boards using the DAC7554IDGS
What boards using the DAC7554IDGS are built for
DAC7554IDGS: common questions
Where can I find a DAC7554IDGS reference design?
Each of the 6 boards on this page is a real design using the DAC7554IDGS. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the DAC7554IDGS?
The HCPL-0631, LM4040DBZ-2.5, SN74LVC1G17DBV, TL072 and HCPL-0631-500E appear in the most repositories here.
Which microcontrollers do boards using the DAC7554IDGS use?
Most are built on STM32 (2).
How big is a typical board using the DAC7554IDGS?
The median is 43.2 × 118.7 mm, and 67% are two-layer designs.
What is the most popular open source board using the DAC7554IDGS?
By GitHub stars, Plinkyblack hwmidi jacks by plinkysynth, with 221 stars.
Can I simulate one of these boards using the DAC7554IDGS before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.