10 open source boards using the HCPL-0631

Real designs built with the HCPL-0631, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

10 boardsClear filters|Most starred

How designs wire the HCPL-0631

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the HCPL-0631 connects to, and the resistors, capacitors and other passives placed on it.

  • The A1 pin has a series resistor on 5 of 7 designs, most often 220 Ω.
  • The C1 pin has a series resistor on 5 of 7 designs, most often 220 Ω.
  • The C2 pin has a series resistor on 5 of 7 designs, most often 220 Ω.
  • The A2 pin has a series resistor on 5 of 5 designs, most often 220 Ω.
A1pin 1Connected to: Signal 71% · GND 29%
  • Series resistor on 71% · 220 Ω (5)
C1pin 2Connected to: A connector 57% · VDDA 29%
  • Series resistor on 71% · 220 Ω (5)
C2pin 3Connected to: A connector 57% · 5V 29%
  • Series resistor on 71% · 220 Ω (5)
A2pin 4Connected to: Signal 100%
  • Series resistor on 100% · 220 Ω (5)
GNDpin 5Connected to: GND 100%
VO2pin 6Connected to: The microcontroller 80%
  • Pull-up to 3.3V on 100% · 220 Ω (5)
VO1pin 7Connected to: The microcontroller 80%
  • Pull-up to 3.3V on 100% · 220 Ω (5)
VCCpin 8Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (5), 10 µF (3)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Plinkyblack hwmidi jacks by plinkysynth, Space by ThisIsNotRocketScience, Audcalc by jonbro and Plinkyblack hwmidi jacks by ember-labs-io.

The HCPL-0631 in open source designs

The gallery holds 10 open source boards using the HCPL-0631 from 7 GitHub repositories; a typical one measures about 65 × 109.2 mm and carries around 214 components.

60% use four copper layers or more, and 80% carry an open source license.

The most starred is Plinkyblack hwmidi jacks by plinkysynth.

Microcontrollers on boards using the HCPL-0631

What boards using the HCPL-0631 are built for

HCPL-0631: common questions

Where can I find a HCPL-0631 reference design?

Each of the 10 boards on this page is a real design using the HCPL-0631. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the HCPL-0631 A1 pin?

The A1 pin has a series resistor on 5 of 7 designs, most often 220 Ω. Counted from the KiCad layouts of 7 open source designs using the HCPL-0631.

What resistor goes on the HCPL-0631 C1 pin?

The C1 pin has a series resistor on 5 of 7 designs, most often 220 Ω. Counted from the KiCad layouts of 7 open source designs using the HCPL-0631.

What resistor goes on the HCPL-0631 C2 pin?

The C2 pin has a series resistor on 5 of 7 designs, most often 220 Ω. Counted from the KiCad layouts of 7 open source designs using the HCPL-0631.

What parts are used alongside the HCPL-0631?

The LM4040DBZ-2.5, W25Q32JVSS, DAC7554IDGS, MCP73831T-2ATI/OT and ME6211C appear in the most repositories here.

Which microcontrollers do boards using the HCPL-0631 use?

Most are built on RP2040/RP2350 (4) and STM32 (2).

How big is a typical board using the HCPL-0631?

The median is 65 × 109.2 mm, and 40% are two-layer designs.

What is the most popular open source board using the HCPL-0631?

By GitHub stars, Plinkyblack hwmidi jacks by plinkysynth, with 221 stars.

Can I simulate one of these boards using the HCPL-0631 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part