6 open source boards using the HCPL-0631-500E

Real designs built with the HCPL-0631-500E, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the HCPL-0631-500E

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the HCPL-0631-500E connects to, and the resistors, capacitors and other passives placed on it.

  • The ANODE_1 pin has a series resistor on 5 of 5 designs, most often 220 Ω.
  • The CATHODE_1 pin has a series resistor on 5 of 5 designs, most often 220 Ω.
  • The CATHODE_2 pin has a series resistor on 5 of 5 designs, most often 220 Ω.
  • The ANODE_2 pin has a series resistor on 5 of 5 designs, most often 220 Ω.
ANODE_1pin 1Connected to: Signal 100%
  • Series resistor on 100% · 220 Ω (5)
CATHODE_1pin 2Connected to: A connector 100%
  • Series resistor on 100% · 220 Ω (5)
CATHODE_2pin 3Connected to: A connector 100%
  • Series resistor on 100% · 220 Ω (5)
ANODE_2pin 4Connected to: Signal 100%
  • Series resistor on 100% · 220 Ω (5)
GNDpin 5Connected to: GND 100%
VO2pin 6Connected to: DAC7554IDGS 40%, WE-TVS-824001 40%, a connector 40%
  • Series resistor on 80% · 100 Ω (2), 1 kΩ (2)
  • Pull-up to 3.3V on 60% · 470 Ω (3)
VO1pin 7Connected to: DAC7554IDGS 40%, WE-TVS-824001 40%, a connector 40%
  • Series resistor on 80% · 100 Ω (2), 1 kΩ (2)
  • Pull-up to 3.3V on 60% · 470 Ω (3)
VCCpin 8Connected to: 5V 100%
  • Decoupling capacitor on 100% · 100 nF (5)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Plinkyblack hwmidi jacks by plinkysynth, ShieldXL by okyeron, Plinkyblack hwmidi jacks by ember-labs-io and Anarchytechnobox by edwindertien.

The HCPL-0631-500E in open source designs

The gallery holds 6 open source boards using the HCPL-0631-500E from 5 GitHub repositories; a typical one measures about 121.9 × 92.4 mm and carries around 165 components.

50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is Plinkyblack hwmidi jacks by plinkysynth.

Microcontrollers on boards using the HCPL-0631-500E

What boards using the HCPL-0631-500E are built for

HCPL-0631-500E: common questions

Where can I find a HCPL-0631-500E reference design?

Each of the 6 boards on this page is a real design using the HCPL-0631-500E. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the HCPL-0631-500E ANODE_1 pin?

The ANODE_1 pin has a series resistor on 5 of 5 designs, most often 220 Ω. Counted from the KiCad layouts of 5 open source designs using the HCPL-0631-500E.

What resistor goes on the HCPL-0631-500E CATHODE_1 pin?

The CATHODE_1 pin has a series resistor on 5 of 5 designs, most often 220 Ω. Counted from the KiCad layouts of 5 open source designs using the HCPL-0631-500E.

What resistor goes on the HCPL-0631-500E CATHODE_2 pin?

The CATHODE_2 pin has a series resistor on 5 of 5 designs, most often 220 Ω. Counted from the KiCad layouts of 5 open source designs using the HCPL-0631-500E.

What parts are used alongside the HCPL-0631-500E?

The DAC7554IDGS, HCPL-0631, LIS2DH12, LM4040DBZ-2.5 and MCP6002-XSN appear in the most repositories here.

Which microcontrollers do boards using the HCPL-0631-500E use?

Most are built on RP2040/RP2350 (3) and STM32 (2).

How big is a typical board using the HCPL-0631-500E?

The median is 121.9 × 92.4 mm, and 50% are two-layer designs.

What is the most popular open source board using the HCPL-0631-500E?

By GitHub stars, Plinkyblack hwmidi jacks by plinkysynth, with 221 stars.

Can I simulate one of these boards using the HCPL-0631-500E before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part