6 open source boards using the DS1302
Real designs built with the DS1302, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Zeta sbc
skiselev
170.2 × 100 mm74 partsGPL-3.051We816
danwerner21
360.1 × 141.4 mm128 parts2LNo license32P8x peripheral card
ksr
280 × 140 mm101 parts4LNo license0SBC80386EX
danwerner21
160 × 100 mm96 parts4LNo license0AVR/Arduino
Iolite
jtsiomb
149 × 100 mm47 parts2LCC-BY-SA-4.032P8x io card
ksr
280 × 140 mm62 parts4LNo license0
How designs wire the DS1302
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the DS1302 connects to, and the resistors, capacitors and other passives placed on it.
- The X1 pin has a crystal on 5 of 5 designs, most often 32.768 kHz.
- The X2 pin has a crystal on 5 of 5 designs, most often 32.768 kHz.
- The VCC2 pin has a decoupling capacitor on 2 of 5 designs, most often 100 nF.
- The VCC1 pin has a capacitor to GND on 2 of 5 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VCC2pin 1 | Connected to: VCC 100% |
|
| X1pin 2 | Connected to: Signal 100% |
|
| X2pin 3 | Connected to: Signal 100% |
|
| GNDpin 4 | Connected to: GND 100% | — |
| VCC1pin 8 | Connected to: Signal 60% · VBAT 40% |
|
3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Zeta sbc by skiselev, We816 by danwerner21, Iolite by jtsiomb and SBC80386EX by danwerner21.
The DS1302 in open source designs
The gallery holds 6 open source boards using the DS1302 from 5 GitHub repositories; a typical one measures about 225.1 × 120 mm and carries around 85 components.
60% use four copper layers or more, and 33% carry an open source license.
The most starred is Zeta sbc by skiselev.
Microcontrollers on boards using the DS1302
What boards using the DS1302 are built for
DS1302: common questions
Where can I find a DS1302 reference design?
Each of the 6 boards on this page is a real design using the DS1302. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the DS1302 X1 pin connected?
The X1 pin has a crystal on 5 of 5 designs, most often 32.768 kHz. Counted from the KiCad layouts of 5 open source designs using the DS1302.
How is the DS1302 X2 pin connected?
The X2 pin has a crystal on 5 of 5 designs, most often 32.768 kHz. Counted from the KiCad layouts of 5 open source designs using the DS1302.
What decoupling capacitors do designs use on the DS1302 VCC2 pin?
The VCC2 pin has a decoupling capacitor on 2 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the DS1302.
What parts are used alongside the DS1302?
The MAX232, 74HCT14, 74LS138, 74LS14 and 74LS245 appear in the most repositories here.
Which microcontrollers do boards using the DS1302 use?
Most are built on AVR/Arduino (1).
How big is a typical board using the DS1302?
The median is 225.1 × 120 mm, and 40% are two-layer designs.
What is the most popular open source board using the DS1302?
By GitHub stars, Zeta sbc by skiselev, with 51 stars.
Can I simulate one of these boards using the DS1302 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.