7 open source boards using the ESDALC6V1W5
Real designs built with the ESDALC6V1W5, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Roboterarm1
tobiasbaas
62.4 × 94.3 mm216 parts4LNo license1ESP32
AgriPV-Messstation
DerSchweigefuchs
113 × 113 mm238 parts4LNo license0- schematic only · 84 parts
Daedalus v0
gregtidanian
84 partsNo license0 STM32
LoST 9632 Board
collins-emasi
56 × 114 mm97 parts4LNo license1STM32
NPK Board x RFM96
collins-emasi
57 × 95 mm96 parts4LNo license1STM32
Stm32 official prototype
blakep7
103.6 × 114.1 mm73 parts4LNo license1ZSWatch
yuxiangcheng2002
40.9 × 38 mm62 parts4LNo license0
How designs wire the ESDALC6V1W5
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the ESDALC6V1W5 connects to, and the resistors, capacitors and other passives placed on it.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 2 | Connected to: GND 80% · a signal 20% | — |
4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Stm32 official prototype by blakep7, NPK Board x RFM96 by collins-emasi, Roboterarm1 by tobiasbaas and AgriPV-Messstation by DerSchweigefuchs.
The ESDALC6V1W5 in open source designs
The gallery holds 7 open source boards using the ESDALC6V1W5 from 6 GitHub repositories; a typical one measures about 59.7 × 104 mm and carries around 96 components.
100% use four copper layers or more, and 0% carry an open source license.
The most starred is Roboterarm1 by tobiasbaas.
Parts used alongside the ESDALC6V1W5
What boards using the ESDALC6V1W5 are built for
ESDALC6V1W5: common questions
Where can I find a ESDALC6V1W5 reference design?
Each of the 7 boards on this page is a real design using the ESDALC6V1W5. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the ESDALC6V1W5?
The BME688, BMI270, BMP581, DRV2603RUNT and FAN5622SX appear in the most repositories here.
Which microcontrollers do boards using the ESDALC6V1W5 use?
Most are built on STM32 (4) and ESP32 (1).
How big is a typical board using the ESDALC6V1W5?
The median is 59.7 × 104 mm, and 0% are two-layer designs.
What is the most popular open source board using the ESDALC6V1W5?
By GitHub stars, Roboterarm1 by tobiasbaas, with 1 stars.
Can I simulate one of these boards using the ESDALC6V1W5 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.