6 open source boards using the FT200XD
Real designs built with the FT200XD, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
SDWire
3mdeb
21.6 × 48.4 mm65 parts4LApache-2.08SDWire
emaste
21.6 × 48.4 mm65 parts4LApache-2.02SDWire
3mdeb
21.6 × 50.4 mm65 parts4LApache-2.01SDWire
agners
21.6 × 48.4 mm65 parts4LApache-2.00SDWire
capotosto
21.6 × 48.4 mm65 parts4LApache-2.00SDWire
moto-timo
21.6 × 48.4 mm65 parts4LApache-2.00
How designs wire the FT200XD
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the FT200XD connects to, and the resistors, capacitors and other passives placed on it.
- Pin 1 has a series resistor on 6 of 6 designs, most often 27 Ω.
- Pin 2 has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 1 µF).
- Pin 3 has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 1 µF).
- Pin 4 has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: Signal 100% |
|
| Pin 2 | Connected to: 3.3V 100% |
|
| Pin 3 | Connected to: 3.3V 100% |
|
| Pin 4 | Connected to: 3.3V 100% |
|
| Pin 5 | Connected to: MC74HC1G04DTT1G 100%, TS3A27518EPWR 100% |
|
| Pin 6 | Connected to: Not connected 100% | — |
| Pin 7 | Connected to: 3.3V 100% |
|
| Pin 8 | Connected to: Not connected 100% | — |
| Pin 9 | Connected to: GND 100% | — |
| Pin 10 | Connected to: Signal 100% |
|
| Pin 11 | Connected to: GND 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include SDWire by 3mdeb, SDWire by emaste, SDWire by 3mdeb and SDWire by agners.
The FT200XD in open source designs
The gallery holds 6 open source boards using the FT200XD from 6 GitHub repositories; a typical one measures about 21.6 × 48.4 mm and carries around 65 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is SDWire by 3mdeb.
Parts used alongside the FT200XD
What boards using the FT200XD are built for
FT200XD: common questions
Where can I find a FT200XD reference design?
Each of the 6 boards on this page is a real design using the FT200XD. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the FT200XD pin 1?
Pin 1 has a series resistor on 6 of 6 designs, most often 27 Ω. Counted from the KiCad layouts of 6 open source designs using the FT200XD.
What decoupling capacitors do designs use on the FT200XD pin 2?
Pin 2 has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 6 open source designs using the FT200XD.
What decoupling capacitors do designs use on the FT200XD pin 3?
Pin 3 has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 6 open source designs using the FT200XD.
What parts are used alongside the FT200XD?
The AT24CS02-SSHM, MC74HC1G04DTT1G, SPX3819M5, TS3A27518EPWR and USB2640-HZH-02 appear in the most repositories here.
How big is a typical board using the FT200XD?
The median is 21.6 × 48.4 mm, and 0% are two-layer designs.
What is the most popular open source board using the FT200XD?
By GitHub stars, SDWire by 3mdeb, with 8 stars.
Can I simulate one of these boards using the FT200XD before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.