8 open source boards using the USB2640-HZH-02
Real designs built with the USB2640-HZH-02, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Sdmux4
hnz1102
68.3 × 57.7 mm115 parts2LMIT16SDWire
3mdeb
21.6 × 48.4 mm65 parts4LApache-2.08SDWire
emaste
21.6 × 48.4 mm65 parts4LApache-2.02SDWire
3mdeb
21.6 × 50.4 mm65 parts4LApache-2.01SDWire
capotosto
21.6 × 48.4 mm65 parts4LApache-2.00SDWire
agners
21.6 × 48.4 mm65 parts4LApache-2.00SDWire
moto-timo
21.6 × 48.4 mm65 parts4LApache-2.00Sdcdmuxemmc
hnz1102
68.3 × 57.8 mm107 parts2LMIT16
How designs wire the USB2640-HZH-02
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the USB2640-HZH-02 connects to, and the resistors, capacitors and other passives placed on it.
- The USBDN_DM2 pin has a series resistor on 7 of 7 designs, most often 27 Ω.
- The USBDN_DP2 pin has a series resistor on 7 of 7 designs, most often 27 Ω.
- The VDD33 pins have a decoupling capacitor on 7 of 7 designs, most often 100 nF (then 1 µF).
- The SPI_CLK/SCL pin has a pull-up to 3.3V on 7 of 7 designs, most often 10 kΩ.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| USBDN_DM2pin 1 | Connected to: Signal 100% |
|
| USBDN_DP2pin 2 | Connected to: Signal 100% |
|
| USBDN_DM3pin 3 | Connected to: Not connected 100% | — |
| USBDN_DP3pin 4 | Connected to: Not connected 100% | — |
| VDD33pin 5, 12, 16, 25, 34, 41, 48 | Connected to: 3.3V 63% · a signal 37% |
|
| PRTCTL2pin 6 | Connected to: Not connected 100% | — |
| PRTCTL3pin 7 | Connected to: Not connected 100% | — |
| SPI_CEpin 8 | Connected to: Not connected 100% | — |
| SPI_CLK/SCLpin 9 | Connected to: AT24CS02-SSHM 86% |
|
| SPI_DO/SDA/SPI_SPD_SELpin 10 | Connected to: AT24CS02-SSHM 86% |
|
| SPI_DIpin 11 | Connected to: Not connected 100% | — |
| XD_D4/SD_WP/MS_SCLKpin 13 | Connected to: GND 100% | — |
| SD_CDpin 14 | Connected to: MC74HC1G04DTT1G 86% |
|
| CRFILTpin 15 | Connected to: Signal 100% |
|
| XD_D1/SD_D7/MS_D6pin 19 | Connected to: Not connected 86% | — |
| XD_D0/SD_D6/MS_D7pin 20 | Connected to: Not connected 86% | — |
| XD_WEpin 22 | Connected to: Not connected 100% | — |
| XD_ALE/SD_D5/MS_D1pin 23 | Connected to: Not connected 86% | — |
| XD_CEpin 26 | Connected to: Not connected 100% | — |
| XD_REpin 27 | Connected to: Not connected 100% | — |
| XD_B/Rpin 28 | Connected to: Not connected 100% | — |
| XD_CDpin 29 | Connected to: Not connected 100% | — |
| XD_D7/SD_D4/MS_D2pin 30 | Connected to: Not connected 86% | — |
| MS_INSpin 31 | Connected to: Not connected 100% | — |
| CRD_PWRpin 35 | Connected to: Signal 100% |
|
| NCpin 36 | Connected to: Not connected 100% | — |
| RESETpin 38 | Connected to: Signal 100% |
|
| VBUS_DETpin 39 | Connected to: 3.3V 100% |
|
| TESTpin 40 | Connected to: GND 100% | — |
| XTAL2pin 44 | Connected to: Signal 100% |
|
| XTAL1/CLKINpin 45 | Connected to: Signal 100% |
|
| PLLFILTpin 46 | Connected to: Signal 100% |
|
| RBIASpin 47 | Connected to: Signal 100% |
|
| VSSpin 49 | Connected to: GND 100% | — |
9 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Sdcdmuxemmc by hnz1102, SDWire by 3mdeb, SDWire by emaste and SDWire by 3mdeb.
The USB2640-HZH-02 in open source designs
The gallery holds 8 open source boards using the USB2640-HZH-02 from 7 GitHub repositories; a typical one measures about 21.6 × 48.4 mm and carries around 65 components.
75% use four copper layers or more, and 100% carry an open source license.
The most starred is Sdmux4 by hnz1102.
Parts used alongside the USB2640-HZH-02
What boards using the USB2640-HZH-02 are built for
USB2640-HZH-02: common questions
Where can I find a USB2640-HZH-02 reference design?
Each of the 8 boards on this page is a real design using the USB2640-HZH-02. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the USB2640-HZH-02 USBDN_DM2 pin?
The USBDN_DM2 pin has a series resistor on 7 of 7 designs, most often 27 Ω. Counted from the KiCad layouts of 7 open source designs using the USB2640-HZH-02.
What resistor goes on the USB2640-HZH-02 USBDN_DP2 pin?
The USBDN_DP2 pin has a series resistor on 7 of 7 designs, most often 27 Ω. Counted from the KiCad layouts of 7 open source designs using the USB2640-HZH-02.
What decoupling capacitors do designs use on the USB2640-HZH-02 VDD33 pin?
The VDD33 pins have a decoupling capacitor on 7 of 7 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 7 open source designs using the USB2640-HZH-02.
What parts are used alongside the USB2640-HZH-02?
The AT24CS02-SSHM, FT200XD, MC74HC1G04DTT1G, SPX3819M5 and TS3A27518EPWR appear in the most repositories here.
How big is a typical board using the USB2640-HZH-02?
The median is 21.6 × 48.4 mm, and 25% are two-layer designs.
What is the most popular open source board using the USB2640-HZH-02?
By GitHub stars, Sdmux4 by hnz1102, with 16 stars.
Can I simulate one of these boards using the USB2640-HZH-02 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.