7 open source boards using the TS3A27518EPWR
Real designs built with the TS3A27518EPWR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
SDWire
3mdeb
21.6 × 48.4 mm65 parts4LApache-2.08SDWire
emaste
21.6 × 48.4 mm65 parts4LApache-2.02SDWire
3mdeb
21.6 × 50.4 mm65 parts4LApache-2.01SDWire
moto-timo
21.6 × 48.4 mm65 parts4LApache-2.00SDWire
agners
21.6 × 48.4 mm65 parts4LApache-2.00SDWire
capotosto
21.6 × 48.4 mm65 parts4LApache-2.00ESP32
Digital test board
Benjamin-girard-1
193 × 110 mm254 parts4LNo license0
How designs wire the TS3A27518EPWR
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the TS3A27518EPWR connects to, and the resistors, capacitors and other passives placed on it.
- The NO4 pin has a series resistor on 6 of 7 designs, most often 1 kΩ.
- The N.C. pin has a series resistor on 6 of 7 designs, most often 1 kΩ.
- The COM2 pin is left unconnected on 6 of 7 designs.
- The VCC pin is tied to GND on 6 of 7 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| COM2pin 3 | Connected to: Not connected 86% | — |
| VCCpin 5 | Connected to: GND 86% | — |
| NO1pin 8 | Connected to: 3.3V 86% | — |
| NO4pin 14 | Connected to: FT200XD 86%, MC74HC1G04DTT1G 86% |
|
| NC3pin 20 | Connected to: GND 86% | — |
| N.C.pin 24 | Connected to: FT200XD 86%, MC74HC1G04DTT1G 86% |
|
18 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include SDWire by 3mdeb, SDWire by emaste, SDWire by 3mdeb and SDWire by agners.
The TS3A27518EPWR in open source designs
The gallery holds 7 open source boards using the TS3A27518EPWR from 7 GitHub repositories; a typical one measures about 21.6 × 48.4 mm and carries around 65 components.
100% use four copper layers or more, and 86% carry an open source license.
The most starred is SDWire by 3mdeb.
Parts used alongside the TS3A27518EPWR
Microcontrollers on boards using the TS3A27518EPWR
What boards using the TS3A27518EPWR are built for
TS3A27518EPWR: common questions
Where can I find a TS3A27518EPWR reference design?
Each of the 7 boards on this page is a real design using the TS3A27518EPWR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the TS3A27518EPWR NO4 pin?
The NO4 pin has a series resistor on 6 of 7 designs, most often 1 kΩ. Counted from the KiCad layouts of 7 open source designs using the TS3A27518EPWR.
What resistor goes on the TS3A27518EPWR N.C. pin?
The N.C. pin has a series resistor on 6 of 7 designs, most often 1 kΩ. Counted from the KiCad layouts of 7 open source designs using the TS3A27518EPWR.
How is the TS3A27518EPWR COM2 pin connected?
The COM2 pin is left unconnected on 6 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the TS3A27518EPWR.
What parts are used alongside the TS3A27518EPWR?
The AT24CS02-SSHM, FT200XD, MC74HC1G04DTT1G, SPX3819M5 and USB2640-HZH-02 appear in the most repositories here.
Which microcontrollers do boards using the TS3A27518EPWR use?
Most are built on ESP32 (1).
How big is a typical board using the TS3A27518EPWR?
The median is 21.6 × 48.4 mm, and 0% are two-layer designs.
What is the most popular open source board using the TS3A27518EPWR?
By GitHub stars, SDWire by 3mdeb, with 8 stars.
Can I simulate one of these boards using the TS3A27518EPWR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.