12 open source boards using the AT24CS02-SSHM
Real designs built with the AT24CS02-SSHM, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
SDWire
3mdeb
21.6 × 48.4 mm65 parts4LApache-2.08SDWire
emaste
21.6 × 48.4 mm65 parts4LApache-2.02STM32
Wordclock
evanparizot
350 × 349.9 mm315 parts4LNo license1SDWire
3mdeb
21.6 × 50.4 mm65 parts4LApache-2.01STM32
Stm32F401CCU NTF24L01 RX TX Sleep
OlegDemk
51 × 87.2 mm71 parts2LNo license0SDWire
capotosto
21.6 × 48.4 mm65 parts4LApache-2.00SDWire
moto-timo
21.6 × 48.4 mm65 parts4LApache-2.00SDWire
agners
21.6 × 48.4 mm65 parts4LApache-2.00STM32
Wordclock proto r1
evanparizot
160 × 160 mm113 parts4LNo license1RP2040/RP2350
Robot
dyu134
70.1 × 100 mm78 parts2LNo license0RP2040/RP2350
ESP-HI-PLUS Desktop Sub module
dyu134
60 × 43 mm61 parts2LNo license0- schematic only · 124 partsRP2040/RP2350
Keyboard
dyu134
124 parts2LNo license0
How designs wire the AT24CS02-SSHM
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the AT24CS02-SSHM connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 9 of 9 designs, most often 100 nF (then 1 µF).
- The SDA pin has a pull-up to 3.3V on 8 of 9 designs, most often 10 kΩ (then 4.7 kΩ).
- The SCL pin has a pull-up to 3.3V on 8 of 9 designs, most often 10 kΩ (then 4.7 kΩ).
- The WP pin is tied to GND on 9 of 9 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| A0pin 1 | Connected to: GND 78% | — |
| A1pin 2 | Connected to: GND 78% | — |
| A2pin 3 | Connected to: GND 78% | — |
| GNDpin 4 | Connected to: GND 100% | — |
| SDApin 5 | Connected to: USB2640-HZH-02 67%, the microcontroller 22% |
|
| SCLpin 6 | Connected to: USB2640-HZH-02 67%, the microcontroller 22% |
|
| WPpin 7 | Connected to: GND 100% | — |
| VCCpin 8 | Connected to: 3.3V 89% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include SDWire by 3mdeb, SDWire by emaste, SDWire by 3mdeb and Wordclock by evanparizot.
The AT24CS02-SSHM in open source designs
The gallery holds 12 open source boards using the AT24CS02-SSHM from 9 GitHub repositories; a typical one measures about 21.6 × 48.4 mm and carries around 65 components.
67% use four copper layers or more, and 50% carry an open source license.
The most starred is SDWire by 3mdeb.
Parts used alongside the AT24CS02-SSHM
Microcontrollers on boards using the AT24CS02-SSHM
What boards using the AT24CS02-SSHM are built for
AT24CS02-SSHM: common questions
Where can I find a AT24CS02-SSHM reference design?
Each of the 12 boards on this page is a real design using the AT24CS02-SSHM. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the AT24CS02-SSHM VCC pin?
The VCC pin has a decoupling capacitor on 9 of 9 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 9 open source designs using the AT24CS02-SSHM.
What pull-up resistor is used on the AT24CS02-SSHM SDA pin?
The SDA pin has a pull-up to 3.3V on 8 of 9 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 9 open source designs using the AT24CS02-SSHM.
What pull-up resistor is used on the AT24CS02-SSHM SCL pin?
The SCL pin has a pull-up to 3.3V on 8 of 9 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 9 open source designs using the AT24CS02-SSHM.
What parts are used alongside the AT24CS02-SSHM?
The FT200XD, MC74HC1G04DTT1G, SPX3819M5, TS3A27518EPWR and USB2640-HZH-02 appear in the most repositories here.
Which microcontrollers do boards using the AT24CS02-SSHM use?
Most are built on RP2040/RP2350 (3) and STM32 (3).
How big is a typical board using the AT24CS02-SSHM?
The median is 21.6 × 48.4 mm, and 33% are two-layer designs.
What is the most popular open source board using the AT24CS02-SSHM?
By GitHub stars, SDWire by 3mdeb, with 8 stars.
Can I simulate one of these boards using the AT24CS02-SSHM before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.