6 open source boards using the GS8332-SR
Real designs built with the GS8332-SR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32SuperCap2024Control V1.1R F3 ISOPWR
hkustenterprize
40.5 × 59.5 mm141 parts4LGPL-3.070
STM32SuperCap2024Control V1.1R F3 ISOPWR
evil0knight
40.5 × 59.5 mm141 parts4LNo license5
STM32SuperCap2024Control V1.1R F3 ISOPWR
GKD-RM-Lab
40.5 × 59.5 mm141 parts4LGPL-3.05
STM32SuperCapPowerBoard G431 Lite V1
60 × 40 mm124 parts4LNo license5
STM32CapArray JYC RM2023 V0.2
59 × 90 mm114 parts4LNo license5
STM32Lambda x2
rusefi
81.9 × 95 mm230 parts4LNo license48
The GS8332-SR in open source designs
The gallery holds 6 open source boards using the GS8332-SR from 4 GitHub repositories; a typical one measures about 49.8 × 59.5 mm and carries around 141 components.
100% use four copper layers or more, and 33% carry an open source license.
The most starred is SuperCap2024Control V1.1R F3 ISOPWR by hkustenterprize.
Parts used alongside the GS8332-SR
Microcontrollers on boards using the GS8332-SR
What boards using the GS8332-SR are built for
GS8332-SR: common questions
Where can I find a GS8332-SR reference design?
Each of the 6 boards on this page is a real design using the GS8332-SR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the GS8332-SR?
The INA240A1PW, ISO_DC, RS3236, RY8411 and SIT1042/3 appear in the most repositories here.
Which microcontrollers do boards using the GS8332-SR use?
Most are built on STM32 (6).
How big is a typical board using the GS8332-SR?
The median is 49.8 × 59.5 mm, and 0% are two-layer designs.
What is the most popular open source board using the GS8332-SR?
By GitHub stars, SuperCap2024Control V1.1R F3 ISOPWR by hkustenterprize, with 70 stars.
Can I simulate one of these boards using the GS8332-SR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.