22 open source boards using the GSG-74HC04
Real designs built with the GSG-74HC04, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
NXP
Hackrf one
Charmve
120 × 75 mm416 partsBSD-2-Clause354NXP
Marzipan
alexmfz
120 × 75 mm416 partsGPL-2.03NXP
Hackrf one
zqupc
120 × 75 mm416 partsGPL-2.00NXP
Hackrf one
2ftg
120 × 75 mm416 partsGPL-2.00NXP
Hackrf one
Meteora-Z
120 × 75 mm416 partsNo license0NXP
Hackrf one
Toysoft
120 × 75 mm416 partsGPL-2.00NXP
Marzipan
Charmve
120 × 75 mm416 partsBSD-2-Clause354NXP
HackRF One
alexmfz
120 × 75 mm415 partsGPL-2.03NXP
Marzipan
Meteora-Z
120 × 75 mm416 partsNo license0NXP
Marzipan
2ftg
120 × 75 mm416 partsGPL-2.00NXP
Marzipan
zqupc
120 × 75 mm416 partsGPL-2.00NXP
Marzipan
Toysoft
120 × 75 mm416 partsGPL-2.00Neapolitan
Charmve
120 × 75 mm290 partsBSD-2-Clause354Neapolitan
alexmfz
120 × 75 mm290 partsGPL-2.03Neapolitan
zqupc
120 × 75 mm290 partsGPL-2.00Neapolitan
2ftg
120 × 75 mm290 partsGPL-2.00Neapolitan
Toysoft
120 × 75 mm290 partsGPL-2.00Operacake
Meteora-Z
120 × 75 mm152 partsNo license0Operacake
Charmve
120 × 75 mm152 partsBSD-2-Clause354Operacake
alexmfz
120 × 75 mm152 partsGPL-2.03Operacake
2ftg
120 × 75 mm152 partsGPL-2.00Operacake
Toysoft
120 × 75 mm152 partsGPL-2.00
How designs wire the GSG-74HC04
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the GSG-74HC04 connects to, and the resistors, capacitors and other passives placed on it.
- Pin 1 has a series resistor on 6 of 6 designs, most often 0 Ω.
- Pin 3 has a series resistor on 6 of 6 designs, most often 0 Ω.
- Pin 0 is left unconnected on 6 of 6 designs.
- Pin 2 is tied to GND on 6 of 6 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 0 | Connected to: Not connected 100% | — |
| Pin 1 | Connected to: A connector 100% |
|
| Pin 2 | Connected to: GND 100% | — |
| Pin 3 | Connected to: A connector 100% |
|
| Pin 4 | Connected to: Not connected 100% | — |
| Pin 5 | Connected to: VBUS 100% |
|
| Pin 6 | Connected to: Not connected 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Hackrf one by Charmve, HackRF One by alexmfz, Hackrf one by 2ftg and Hackrf one by Meteora-Z.
The GSG-74HC04 in open source designs
The gallery holds 22 open source boards using the GSG-74HC04 from 6 GitHub repositories; a typical one measures about 120 × 75 mm and carries around 416 components.
86% carry an open source license.
The most starred is Hackrf one by Charmve.
Parts used alongside the GSG-74HC04
Microcontrollers on boards using the GSG-74HC04
What boards using the GSG-74HC04 are built for
GSG-74HC04: common questions
Where can I find a GSG-74HC04 reference design?
Each of the 22 boards on this page is a real design using the GSG-74HC04. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the GSG-74HC04 pin 1?
Pin 1 has a series resistor on 6 of 6 designs, most often 0 Ω. Counted from the KiCad layouts of 6 open source designs using the GSG-74HC04.
What resistor goes on the GSG-74HC04 pin 3?
Pin 3 has a series resistor on 6 of 6 designs, most often 0 Ω. Counted from the KiCad layouts of 6 open source designs using the GSG-74HC04.
How is the GSG-74HC04 pin 0 connected?
Pin 0 is left unconnected on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the GSG-74HC04.
What parts are used alongside the GSG-74HC04?
The GSG-74HC08, GSG-XC2C64A-7VQG100C, LPC43XXFBD144, MAX2837 and MAX5864 appear in the most repositories here.
Which microcontrollers do boards using the GSG-74HC04 use?
Most are built on NXP (12).
How big is a typical board using the GSG-74HC04?
The median is 120 × 75 mm.
What is the most popular open source board using the GSG-74HC04?
By GitHub stars, Hackrf one by Charmve, with 354 stars.
Can I simulate one of these boards using the GSG-74HC04 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.