31 open source boards using the MGA-81563

Real designs built with the MGA-81563, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

31 boardsClear filters|Most starred

How designs wire the MGA-81563

Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the MGA-81563 connects to, and the resistors, capacitors and other passives placed on it.

  • Pin 3 has a series capacitor on 11 of 11 designs, most often 100 nF.
  • Pin 6 has a inductor on 11 of 11 designs, most often 10 µH.
  • Pin 6 has a series capacitor on 11 of 11 designs, most often 100 nF.
  • Pin 1 is tied to GND on 11 of 11 designs.
Pin 1Connected to: GND 100%
Pin 2Connected to: GND 100%
Pin 3Connected to: Signal 100%
  • Series capacitor on 100% · 100 nF (11)
Pin 4Connected to: GND 100%
Pin 5Connected to: GND 100%
Pin 6Connected to: Signal 100%
  • Inductor on 100% · 10 µH (11)
  • Series capacitor on 100% · 100 nF (11)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Hackrf one by Charmve, Marzipan by Josephrp, HackRF One by alexmfz and Noob sdr by ainnovators.

The MGA-81563 in open source designs

The gallery holds 31 open source boards using the MGA-81563 from 11 GitHub repositories; a typical one measures about 120 × 75 mm and carries around 416 components.

84% carry an open source license.

The most starred is Hackrf one by Charmve.

Microcontrollers on boards using the MGA-81563

What boards using the MGA-81563 are built for

MGA-81563: common questions

Where can I find a MGA-81563 reference design?

Each of the 31 boards on this page is a real design using the MGA-81563. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the MGA-81563 pin 3 connected?

Pin 3 has a series capacitor on 11 of 11 designs, most often 100 nF. Counted from the KiCad layouts of 11 open source designs using the MGA-81563.

How is the MGA-81563 pin 6 connected?

Pin 6 has a inductor on 11 of 11 designs, most often 10 µH. Counted from the KiCad layouts of 11 open source designs using the MGA-81563.

How is the MGA-81563 pin 1 connected?

Pin 1 is tied to GND on 11 of 11 designs. Counted from the KiCad layouts of 11 open source designs using the MGA-81563.

What parts are used alongside the MGA-81563?

The MAX2837, MAX5864, RFFC5072, RX_HIGHPASS_FILTER and RX_LOWPASS_FILTER appear in the most repositories here.

Which microcontrollers do boards using the MGA-81563 use?

Most are built on NXP (16) and FPGA (1).

How big is a typical board using the MGA-81563?

The median is 120 × 75 mm.

What is the most popular open source board using the MGA-81563?

By GitHub stars, Hackrf one by Charmve, with 354 stars.

Can I simulate one of these boards using the MGA-81563 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part