10 open source boards using the GSG-74HC08
Real designs built with the GSG-74HC08, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Neapolitan
Charmve
120 × 75 mm290 partsBSD-2-Clause354Neapolitan
alexmfz
120 × 75 mm290 partsGPL-2.03Neapolitan
2ftg
120 × 75 mm290 partsGPL-2.00Neapolitan
Toysoft
120 × 75 mm290 partsGPL-2.00Neapolitan
zqupc
120 × 75 mm290 partsGPL-2.00Operacake
Meteora-Z
120 × 75 mm152 partsNo license0Operacake
Charmve
120 × 75 mm152 partsBSD-2-Clause354Operacake
alexmfz
120 × 75 mm152 partsGPL-2.03Operacake
Toysoft
120 × 75 mm152 partsGPL-2.00Operacake
2ftg
120 × 75 mm152 partsGPL-2.00
How designs wire the GSG-74HC08
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the GSG-74HC08 connects to, and the resistors, capacitors and other passives placed on it.
- Pin 5 has a capacitor to GND on 6 of 6 designs, most often 1 µF (then 100 nF).
- Pin 1 has a decoupling capacitor on 5 of 6 designs, most often 100 nF.
- Pin 2 is tied to GND on 6 of 6 designs.
- Pin 3 has a capacitor to GND on 5 of 6 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: VCC 83% · a signal 17% |
|
| Pin 2 | Connected to: GND 100% | — |
| Pin 3 | Connected to: MAX5864 83% · GND 17% |
|
| Pin 4 | Connected to: Not connected 83% · a signal 17% | — |
| Pin 5 | Connected to: Signal 83% · VCC 17% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Neapolitan by Charmve, Neapolitan by alexmfz, Neapolitan by 2ftg and Operacake by Meteora-Z.
The GSG-74HC08 in open source designs
The gallery holds 10 open source boards using the GSG-74HC08 from 6 GitHub repositories; a typical one measures about 120 × 75 mm and carries around 221 components.
90% carry an open source license.
The most starred is Neapolitan by Charmve.
Parts used alongside the GSG-74HC08
What boards using the GSG-74HC08 are built for
GSG-74HC08: common questions
Where can I find a GSG-74HC08 reference design?
Each of the 10 boards on this page is a real design using the GSG-74HC08. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the GSG-74HC08 pin 5 connected?
Pin 5 has a capacitor to GND on 6 of 6 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 6 open source designs using the GSG-74HC08.
What decoupling capacitors do designs use on the GSG-74HC08 pin 1?
Pin 1 has a decoupling capacitor on 5 of 6 designs, most often 100 nF. Counted from the KiCad layouts of 6 open source designs using the GSG-74HC08.
How is the GSG-74HC08 pin 2 connected?
Pin 2 is tied to GND on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the GSG-74HC08.
What parts are used alongside the GSG-74HC08?
The GSG-74HC04, MGA-81563, RFFC5072, SKY13317 and SKY13350 appear in the most repositories here.
How big is a typical board using the GSG-74HC08?
The median is 120 × 75 mm.
What is the most popular open source board using the GSG-74HC08?
By GitHub stars, Neapolitan by Charmve, with 354 stars.
Can I simulate one of these boards using the GSG-74HC08 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.