13 open source boards using the LPC43XXFBD144
Real designs built with the LPC43XXFBD144, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
NXP
Hackrf one
Charmve
120 × 75 mm416 partsBSD-2-Clause354NXP
Marzipan
alexmfz
120 × 75 mm416 partsGPL-2.03FPGA
Noob sdr
ainnovators
130.3 × 100 mm473 partsGPL-3.01NXP
Hackrf one
Meteora-Z
120 × 75 mm416 partsNo license0NXP
Hackrf one
Toysoft
120 × 75 mm416 partsGPL-2.00NXP
Hackrf one
zqupc
120 × 75 mm416 partsGPL-2.00NXP
Hackrf one
2ftg
120 × 75 mm416 partsGPL-2.00NXP
Marzipan
Charmve
120 × 75 mm416 partsBSD-2-Clause354NXP
HackRF One
alexmfz
120 × 75 mm415 partsGPL-2.03NXP
Marzipan
Meteora-Z
120 × 75 mm416 partsNo license0NXP
Marzipan
Toysoft
120 × 75 mm416 partsGPL-2.00NXP
Marzipan
2ftg
120 × 75 mm416 partsGPL-2.00NXP
Marzipan
zqupc
120 × 75 mm416 partsGPL-2.00
How designs wire the LPC43XXFBD144
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the LPC43XXFBD144 connects to, and the resistors, capacitors and other passives placed on it.
- Pin 1 has a capacitor to GND on 7 of 7 designs, most often 33 pF.
- Pin 3 has a series resistor on 7 of 7 designs, most often 470 Ω.
- Pin 5 has a decoupling capacitor on 7 of 7 designs, most often 100 nF.
- Pin 7 has a series resistor on 7 of 7 designs, most often 39 Ω.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: SKY13350 100%, a connector 100% |
|
| Pin 3 | Connected to: A connector 86% |
|
| Pin 4 | Connected to: GND 100% | — |
| Pin 5 | Connected to: VCC 100% |
|
| Pin 7 | Connected to: A connector 100% |
|
| Pin 8 | Connected to: A connector 86% |
|
| Pin 11 | Connected to: MAX2837 100% |
|
| Pin 12 | Connected to: Signal 100% |
|
| Pin 13 | Connected to: Signal 100% |
|
| Pin 14 | Connected to: A connector 100% |
|
| Pin 15 | Connected to: Signal 100% |
|
| Pin 16 | Connected to: VCC 100% |
|
| Pin 17 | Connected to: VCC 100% |
|
| Pin 18 | Connected to: Signal 100% |
|
| Pin 19 | Connected to: GND 100% | — |
| Pin 20 | Connected to: Signal 100% |
|
| Pin 21 | Connected to: Signal 100% |
|
| Pin 22 | Connected to: A connector 100% |
|
| Pin 23 | Connected to: GND 100% | — |
| Pin 24 | Connected to: Signal 100% |
|
| Pin 25 | Connected to: VCC 100% |
|
| Pin 27 | Connected to: A connector 100% |
|
| Pin 28 | Connected to: A connector 100% |
|
| Pin 31 | Connected to: A connector 100% |
|
| Pin 32 | Connected to: A connector 100% |
|
| Pin 33 | Connected to: Signal 100% |
|
| Pin 34 | Connected to: Signal 100% |
|
| Pin 35 | Connected to: Signal 100% |
|
| Pin 36 | Connected to: VCC 100% |
|
| Pin 37 | Connected to: A connector 86% |
|
| Pin 38 | Connected to: A connector 100% |
|
| Pin 39 | Connected to: SKY13350 100%, a connector 100% |
|
| Pin 40 | Connected to: GND 100% | — |
| Pin 41 | Connected to: VCC 100% |
|
| Pin 42 | Connected to: A connector 100% |
|
| Pin 43 | Connected to: A connector 100% |
|
| Pin 44 | Connected to: MAX2837 100%, a connector 100% |
|
| Pin 46 | Connected to: SKY13317 100%, a connector 100% |
|
| Pin 50 | Connected to: SKY13317 100%, SKY13350 100%, a connector 100% |
|
| Pin 54 | Connected to: SKY13317 100%, a connector 100% |
|
104 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Hackrf one by Charmve, HackRF One by alexmfz, Noob sdr by ainnovators and Hackrf one by 2ftg.
The LPC43XXFBD144 in open source designs
The gallery holds 13 open source boards using the LPC43XXFBD144 from 7 GitHub repositories; a typical one measures about 120 × 75 mm and carries around 416 components.
85% carry an open source license.
The most starred is Hackrf one by Charmve.
Parts used alongside the LPC43XXFBD144
What boards using the LPC43XXFBD144 are built for
LPC43XXFBD144: common questions
Where can I find a LPC43XXFBD144 reference design?
Each of the 13 boards on this page is a real design using the LPC43XXFBD144. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the LPC43XXFBD144 pin 1 connected?
Pin 1 has a capacitor to GND on 7 of 7 designs, most often 33 pF. Counted from the KiCad layouts of 7 open source designs using the LPC43XXFBD144.
What resistor goes on the LPC43XXFBD144 pin 3?
Pin 3 has a series resistor on 7 of 7 designs, most often 470 Ω. Counted from the KiCad layouts of 7 open source designs using the LPC43XXFBD144.
What decoupling capacitors do designs use on the LPC43XXFBD144 pin 5?
Pin 5 has a decoupling capacitor on 7 of 7 designs, most often 100 nF. Counted from the KiCad layouts of 7 open source designs using the LPC43XXFBD144.
What parts are used alongside the LPC43XXFBD144?
The MAX2837, MAX5864, MGA-81563, RFFC5072 and RX_HIGHPASS_FILTER appear in the most repositories here.
Which microcontrollers do boards using the LPC43XXFBD144 use?
Most are built on NXP (12) and FPGA (1).
How big is a typical board using the LPC43XXFBD144?
The median is 120 × 75 mm.
What is the most popular open source board using the LPC43XXFBD144?
By GitHub stars, Hackrf one by Charmve, with 354 stars.
Can I simulate one of these boards using the LPC43XXFBD144 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.