31 open source boards using the SI5351C
Real designs built with the SI5351C, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
NXP
Hackrf one
Charmve
120 × 75 mm416 partsBSD-2-Clause354Ossc pro
marqs85
212.5 × 99.5 mm492 parts2LCERN-OHL-P-2.031NXP
Marzipan
Josephrp
120 × 75 mm416 partsCustom license12RP2040/RP2350
YamhillFrontPanel
NT7S
170 × 100 mm207 parts4LNo license9Microchip SAM
OpenBeacon3
etherkit
120 × 90 mm97 parts2LGPL-3.07NXP
Marzipan
alexmfz
120 × 75 mm416 partsGPL-2.03FPGA
Noob sdr
ainnovators
130.3 × 100 mm473 partsGPL-3.01NXP
Marzipan
greearb
120 × 75 mm416 partsGPL-2.01NXP
Marzipan
JensLiu
120 × 75 mm416 partsGPL-2.01FPGA
Stream v2
okojokwukenogbole-netizen
130 × 145 mm694 parts12LNo license0NXP
Hackrf one
2ftg
120 × 75 mm416 partsGPL-2.00NXP
Marzipan
deepin-community
120 × 75 mm416 partsGPL-2.00NXP
Hackrf one
Meteora-Z
120 × 75 mm416 partsNo license0NXP
Hackrf one
Toysoft
120 × 75 mm416 partsGPL-2.00NXP
Hackrf one
zqupc
120 × 75 mm416 partsGPL-2.00NXP
Marzipan
Charmve
120 × 75 mm416 partsBSD-2-Clause354NXP
HackRF One
alexmfz
120 × 75 mm415 partsGPL-2.03NXP
Marzipan
2ftg
120 × 75 mm416 partsGPL-2.00NXP
Marzipan
Meteora-Z
120 × 75 mm416 partsNo license0NXP
Marzipan
zqupc
120 × 75 mm416 partsGPL-2.00NXP
Marzipan
Toysoft
120 × 75 mm416 partsGPL-2.00FPGA
USTREAM
okojokwukenogbole-netizen
122.6 × 45.8 mm346 parts12LNo license0Neapolitan
Charmve
120 × 75 mm290 partsBSD-2-Clause354Neapolitan
Josephrp
120 × 75 mm290 partsCustom license12Neapolitan
alexmfz
120 × 75 mm290 partsGPL-2.03Neapolitan
JensLiu
120 × 75 mm290 partsGPL-2.01Neapolitan
greearb
120 × 75 mm290 partsGPL-2.01Neapolitan
zqupc
120 × 75 mm290 partsGPL-2.00Neapolitan
2ftg
120 × 75 mm290 partsGPL-2.00Neapolitan
Toysoft
120 × 75 mm290 partsGPL-2.00Neapolitan
deepin-community
120 × 75 mm290 partsGPL-2.00
How designs wire the SI5351C
Read from the KiCad layouts of 15 open source designs, one per repository: what each pin of the SI5351C connects to, and the resistors, capacitors and other passives placed on it.
- The SCL pin has a pull-up to VCC on 15 of 15 designs, most often 1.8 kΩ (then 4.7 kΩ).
- The SDA pin has a pull-up to VCC on 15 of 15 designs, most often 1.8 kΩ (then 4.7 kΩ).
- The VDDOA pin has a decoupling capacitor on 14 of 15 designs, most often 100 nF.
- The VDD pin has a decoupling capacitor on 14 of 15 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 0 | Connected to: GND 100% | — |
| XApin 1 | Connected to: Signal 100% |
|
| XBpin 2 | Connected to: Signal 80% · not connected 20% |
|
| INTRpin 3 | Connected to: A connector 80% |
|
| SCLpin 4 | Connected to: A connector 73%, LPC43XXFBD144 47%, the microcontroller 33% |
|
| SDApin 5 | Connected to: A connector 73%, LPC43XXFBD144 47%, the microcontroller 33% |
|
| CLKINpin 6 | Connected to: A connector 93% |
|
| OEBpin 7 | Connected to: A connector 73% · GND 27% |
|
| CLK3pin 8 | Connected to: Signal 80% · not connected 20% |
|
| CLK2pin 9 | Connected to: Signal 93% |
|
| VDDOBpin 10 | Connected to: VCC 87% |
|
| VDDOApin 11 | Connected to: VCC 93% |
|
| CLK1pin 12 | Connected to: Signal 87% |
|
| CLK0pin 13 | Connected to: Signal 100% |
|
| VDDODpin 14 | Connected to: VCC 87% |
|
| CLK7pin 15 | Connected to: Signal 80% · not connected 20% |
|
| CLK5pin 17 | Connected to: Signal 73% · not connected 27% |
|
| VDDOCpin 18 | Connected to: VCC 87% |
|
| CLK4pin 19 | Connected to: Signal 93% |
|
| VDDpin 20 | Connected to: VCC 93% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Hackrf one by Charmve, Ossc pro by marqs85, Marzipan by Josephrp and YamhillFrontPanel by NT7S.
The SI5351C in open source designs
The gallery holds 31 open source boards using the SI5351C from 15 GitHub repositories; a typical one measures about 120 × 75 mm and carries around 416 components.
60% use four copper layers or more, and 77% carry an open source license.
The most starred is Hackrf one by Charmve.
Parts used alongside the SI5351C
Microcontrollers on boards using the SI5351C
What boards using the SI5351C are built for
SI5351C: common questions
Where can I find a SI5351C reference design?
Each of the 31 boards on this page is a real design using the SI5351C. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the SI5351C SCL pin?
The SCL pin has a pull-up to VCC on 15 of 15 designs, most often 1.8 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 15 open source designs using the SI5351C.
What pull-up resistor is used on the SI5351C SDA pin?
The SDA pin has a pull-up to VCC on 15 of 15 designs, most often 1.8 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 15 open source designs using the SI5351C.
What decoupling capacitors do designs use on the SI5351C VDDOA pin?
The VDDOA pin has a decoupling capacitor on 14 of 15 designs, most often 100 nF. Counted from the KiCad layouts of 15 open source designs using the SI5351C.
What parts are used alongside the SI5351C?
The MAX2837, MAX5864, MGA-81563, RFFC5072 and RX_HIGHPASS_FILTER appear in the most repositories here.
Which microcontrollers do boards using the SI5351C use?
Most are built on NXP (16), FPGA (3), RP2040/RP2350 (1) and Microchip SAM (1).
How big is a typical board using the SI5351C?
The median is 120 × 75 mm, and 40% are two-layer designs.
What is the most popular open source board using the SI5351C?
By GitHub stars, Hackrf one by Charmve, with 354 stars.
Can I simulate one of these boards using the SI5351C before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.