33 open source boards using the RFFC5072
Real designs built with the RFFC5072, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
NXP
Hackrf one
Charmve
120 × 75 mm416 partsBSD-2-Clause354NXP
Marzipan
Josephrp
120 × 75 mm416 partsCustom license12NXP
Marzipan
alexmfz
120 × 75 mm416 partsGPL-2.03FPGA
Noob sdr
ainnovators
130.3 × 100 mm473 partsGPL-3.01NXP
Marzipan
JensLiu
120 × 75 mm416 partsGPL-2.01NXP
Marzipan
greearb
120 × 75 mm416 partsGPL-2.01NXP
Hackrf one
zqupc
120 × 75 mm416 partsGPL-2.00NXP
Hackrf one
2ftg
120 × 75 mm416 partsGPL-2.00NXP
Hackrf one
Meteora-Z
120 × 75 mm416 partsNo license0NXP
Hackrf one
Toysoft
120 × 75 mm416 partsGPL-2.00NXP
Marzipan
deepin-community
120 × 75 mm416 partsGPL-2.00NXP
Marzipan
Charmve
120 × 75 mm416 partsBSD-2-Clause354NXP
HackRF One
alexmfz
120 × 75 mm415 partsGPL-2.03NXP
Marzipan
Toysoft
120 × 75 mm416 partsGPL-2.00NXP
Marzipan
Meteora-Z
120 × 75 mm416 partsNo license0NXP
Marzipan
zqupc
120 × 75 mm416 partsGPL-2.00NXP
Marzipan
2ftg
120 × 75 mm416 partsGPL-2.00Neapolitan
Charmve
120 × 75 mm290 partsBSD-2-Clause354Neapolitan
Josephrp
120 × 75 mm290 partsCustom license12Neapolitan
alexmfz
120 × 75 mm290 partsGPL-2.03Neapolitan
greearb
120 × 75 mm290 partsGPL-2.01Neapolitan
JensLiu
120 × 75 mm290 partsGPL-2.01Neapolitan
zqupc
120 × 75 mm290 partsGPL-2.00Neapolitan
2ftg
120 × 75 mm290 partsGPL-2.00Neapolitan
deepin-community
120 × 75 mm290 partsGPL-2.00Neapolitan
Toysoft
120 × 75 mm290 partsGPL-2.00Operacake
Meteora-Z
120 × 75 mm152 partsNo license0Operacake
Charmve
120 × 75 mm152 partsBSD-2-Clause354Operacake
alexmfz
120 × 75 mm152 partsGPL-2.03Operacake
Toysoft
120 × 75 mm152 partsGPL-2.00Operacake
2ftg
120 × 75 mm152 partsGPL-2.00LNA915
Charmve
11.7 × 8.7 mm24 parts4LBSD-2-Clause354LNA915
alexmfz
11.7 × 8.7 mm24 parts4LGPL-2.03
How designs wire the RFFC5072
Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the RFFC5072 connects to, and the resistors, capacitors and other passives placed on it.
- Pin 4 has a resistor to GND on 11 of 11 designs, most often 51 kΩ.
- Pin 5 has a capacitor to GND on 11 of 11 designs, most often 33 pF (then 10 nF).
- Pin 5 has a inductor on 11 of 11 designs, most often 10 µH.
- Pin 6 has a series resistor on 11 of 11 designs, most often 22 kΩ.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 0 | Connected to: GND 100% | — |
| Pin 1 | Connected to: Not connected 100% | — |
| Pin 2 | Connected to: Not connected 100% | — |
| Pin 3 | Connected to: Not connected 100% | — |
| Pin 4 | Connected to: Signal 100% |
|
| Pin 5 | Connected to: MAX2837 100%, MAX5864 100%, a connector 82% |
|
| Pin 6 | Connected to: Signal 100% |
|
| Pin 7 | Connected to: Signal 100% |
|
| Pin 8 | Connected to: Signal 100% |
|
| Pin 10 | Connected to: A connector 100% |
|
| Pin 11 | Connected to: Not connected 100% | — |
| Pin 12 | Connected to: GND 100% | — |
| Pin 13 | Connected to: Not connected 100% | — |
| Pin 14 | Connected to: Not connected 100% | — |
| Pin 15 | Connected to: A connector 100% |
|
| Pin 17 | Connected to: Not connected 100% | — |
| Pin 18 | Connected to: Not connected 100% | — |
| Pin 19 | Connected to: VCC 100% |
|
| Pin 20 | Connected to: Not connected 100% | — |
| Pin 21 | Connected to: Not connected 100% | — |
| Pin 22 | Connected to: MAX2837 100%, MAX5864 100%, a connector 82% |
|
| Pin 23 | Connected to: Signal 100% |
|
| Pin 24 | Connected to: Signal 100% |
|
| Pin 27 | Connected to: Signal 100% |
|
| Pin 28 | Connected to: Signal 100% |
|
| Pin 29 | Connected to: A connector 100%, LPC43XXFBD144 64%, the microcontroller 36% |
|
| Pin 30 | Connected to: A connector 100%, LPC43XXFBD144 64%, the microcontroller 36% |
|
| Pin 31 | Connected to: A connector 100%, LPC43XXFBD144 64%, the microcontroller 36% |
|
| Pin 32 | Connected to: A connector 100%, LPC43XXFBD144 64%, the microcontroller 36% |
|
4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Hackrf one by Charmve, Marzipan by Josephrp, HackRF One by alexmfz and Noob sdr by ainnovators.
The RFFC5072 in open source designs
The gallery holds 33 open source boards using the RFFC5072 from 11 GitHub repositories; a typical one measures about 120 × 75 mm and carries around 415 components.
100% use four copper layers or more, and 85% carry an open source license.
The most starred is Hackrf one by Charmve.
Parts used alongside the RFFC5072
What boards using the RFFC5072 are built for
RFFC5072: common questions
Where can I find a RFFC5072 reference design?
Each of the 33 boards on this page is a real design using the RFFC5072. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the RFFC5072 pin 4?
Pin 4 has a resistor to GND on 11 of 11 designs, most often 51 kΩ. Counted from the KiCad layouts of 11 open source designs using the RFFC5072.
How is the RFFC5072 pin 5 connected?
Pin 5 has a capacitor to GND on 11 of 11 designs, most often 33 pF (then 10 nF). Counted from the KiCad layouts of 11 open source designs using the RFFC5072.
What resistor goes on the RFFC5072 pin 6?
Pin 6 has a series resistor on 11 of 11 designs, most often 22 kΩ. Counted from the KiCad layouts of 11 open source designs using the RFFC5072.
What parts are used alongside the RFFC5072?
The MAX2837, MAX5864, MGA-81563, RX_HIGHPASS_FILTER and RX_LOWPASS_FILTER appear in the most repositories here.
Which microcontrollers do boards using the RFFC5072 use?
Most are built on NXP (16) and FPGA (1).
How big is a typical board using the RFFC5072?
The median is 120 × 75 mm, and 0% are two-layer designs.
What is the most popular open source board using the RFFC5072?
By GitHub stars, Hackrf one by Charmve, with 354 stars.
Can I simulate one of these boards using the RFFC5072 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.