26 open source boards using the RX_LOWPASS_FILTER

Real designs built with the RX_LOWPASS_FILTER, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

26 boardsClear filters|Most starred

How designs wire the RX_LOWPASS_FILTER

Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the RX_LOWPASS_FILTER connects to, and the resistors, capacitors and other passives placed on it.

  • Pin 1 has a series capacitor on 11 of 11 designs, most often 100 nF.
  • Pin 4 has a series capacitor on 11 of 11 designs, most often 100 nF.
  • Pin 2 is tied to GND on 11 of 11 designs.
  • Pin 3 is tied to GND on 11 of 11 designs.
Pin 1Connected to: Signal 100%
  • Series capacitor on 100% · 100 nF (11)
Pin 2Connected to: GND 100%
Pin 3Connected to: GND 100%
Pin 4Connected to: Signal 100%
  • Series capacitor on 100% · 100 nF (11)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Hackrf one by Charmve, Marzipan by Josephrp, HackRF One by alexmfz and Noob sdr by ainnovators.

The RX_LOWPASS_FILTER in open source designs

The gallery holds 26 open source boards using the RX_LOWPASS_FILTER from 11 GitHub repositories; a typical one measures about 120 × 75 mm and carries around 416 components.

85% carry an open source license.

The most starred is Hackrf one by Charmve.

Microcontrollers on boards using the RX_LOWPASS_FILTER

What boards using the RX_LOWPASS_FILTER are built for

RX_LOWPASS_FILTER: common questions

Where can I find a RX_LOWPASS_FILTER reference design?

Each of the 26 boards on this page is a real design using the RX_LOWPASS_FILTER. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the RX_LOWPASS_FILTER pin 1 connected?

Pin 1 has a series capacitor on 11 of 11 designs, most often 100 nF. Counted from the KiCad layouts of 11 open source designs using the RX_LOWPASS_FILTER.

How is the RX_LOWPASS_FILTER pin 4 connected?

Pin 4 has a series capacitor on 11 of 11 designs, most often 100 nF. Counted from the KiCad layouts of 11 open source designs using the RX_LOWPASS_FILTER.

How is the RX_LOWPASS_FILTER pin 2 connected?

Pin 2 is tied to GND on 11 of 11 designs. Counted from the KiCad layouts of 11 open source designs using the RX_LOWPASS_FILTER.

What parts are used alongside the RX_LOWPASS_FILTER?

The MAX2837, MAX5864, MGA-81563, RFFC5072 and RX_HIGHPASS_FILTER appear in the most repositories here.

Which microcontrollers do boards using the RX_LOWPASS_FILTER use?

Most are built on NXP (16) and FPGA (1).

How big is a typical board using the RX_LOWPASS_FILTER?

The median is 120 × 75 mm.

What is the most popular open source board using the RX_LOWPASS_FILTER?

By GitHub stars, Hackrf one by Charmve, with 354 stars.

Can I simulate one of these boards using the RX_LOWPASS_FILTER before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part