20 open source boards using the INA240A1DR
Real designs built with the INA240A1DR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Before maze
odtu
100 × 90 mm109 parts4LCERN-OHL-S-2.02ESP32
Before maze
ekremturanfirat
100 × 90 mm109 parts4LCERN-OHL-S-2.02STM32
Pd1180-epr
techmannih
85.9 × 85.9 mm255 parts4LNo license0AIPE 48V to 24V / 1kW
FulongLi
300 × 220 mm220 parts6LNo license0Ax7010 servo reva
magic-alt
130 × 95 mm157 parts2LNo license0STM32
CAN-BUS-FOC-Actuator
f1133
60 × 60 mm73 parts2LNo license0ESP32
ESC3Phase
ekremturanfirat
100 × 90 mm109 parts4LCERN-OHL-S-2.02ESP32
ESC3Phase
odtu
100 × 90 mm109 parts4LCERN-OHL-S-2.02AIPE SiC Buck Power
FulongLi
240 × 180 mm213 parts4LNo license0ESP32
Nognd
odtu
100 × 90 mm109 parts4LCERN-OHL-S-2.02ESP32
Nognd
ekremturanfirat
100 × 90 mm109 parts4LCERN-OHL-S-2.02Dogrudan sdr D
kocer
275 × 185 mm243 parts2LNo license1AIPE SiC Buck Control
FulongLi
120 × 80 mm187 parts4LNo license0ESP32
Pre routed
ekremturanfirat
100 × 90 mm109 parts4LCERN-OHL-S-2.02ESP32
Pre routed
odtu
100 × 90 mm109 parts4LCERN-OHL-S-2.02ESP32
R7
ekremturanfirat
100 × 90 mm109 parts4LCERN-OHL-S-2.02ESP32
R7
odtu
100 × 90 mm109 parts4LCERN-OHL-S-2.02ESP32
R7 nognd
ekremturanfirat
100 × 90 mm109 parts4LCERN-OHL-S-2.02ESP32
R7 nognd
odtu
100 × 90 mm109 parts4LCERN-OHL-S-2.02Amod b
gallicchio
100 × 100 mm143 parts4LCERN-OHL-P-2.00
How designs wire the INA240A1DR
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the INA240A1DR connects to, and the resistors, capacitors and other passives placed on it.
- Pin 6 has a decoupling capacitor on 6 of 7 designs, most often 100 nF (then 22 µF).
- Pin 2 is tied to GND on 7 of 7 designs.
- Pin 3 is tied to GND on 7 of 7 designs.
- Pin 6 is tied to 3.3V on 5 of 7 designs (a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: A connector 29% |
|
| Pin 2 | Connected to: GND 100% | — |
| Pin 3 | Connected to: GND 100% | — |
| Pin 5 | Connected to: The microcontroller 29% |
|
| Pin 6 | Connected to: 3.3V 71% · a signal 29% |
|
| Pin 7 | Connected to: GND 57% · a signal 29% |
|
| Pin 8 | Connected to: Signal 100% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Before maze by ekremturanfirat, Before maze by odtu, Dogrudan sdr D by kocer and AIPE 48V to 24V / 1kW by FulongLi.
The INA240A1DR in open source designs
The gallery holds 20 open source boards using the INA240A1DR from 8 GitHub repositories; a typical one measures about 100 × 90 mm and carries around 109 components.
85% use four copper layers or more, and 65% carry an open source license.
The most starred is ESC3Phase by odtu.
Parts used alongside the INA240A1DR
What boards using the INA240A1DR are built for
INA240A1DR: common questions
Where can I find a INA240A1DR reference design?
Each of the 20 boards on this page is a real design using the INA240A1DR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the INA240A1DR pin 6?
Pin 6 has a decoupling capacitor on 6 of 7 designs, most often 100 nF (then 22 µF). Counted from the KiCad layouts of 7 open source designs using the INA240A1DR.
How is the INA240A1DR pin 2 connected?
Pin 2 is tied to GND on 7 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the INA240A1DR.
How is the INA240A1DR pin 3 connected?
Pin 3 is tied to GND on 7 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the INA240A1DR.
What parts are used alongside the INA240A1DR?
The LM5164DDAR, LM74700QDBVRQ1, SN65HVD230DR, DRV8323RSRGZT and ESP32-WROOM-32E-N4 appear in the most repositories here.
Which microcontrollers do boards using the INA240A1DR use?
Most are built on ESP32 (12) and STM32 (2).
How big is a typical board using the INA240A1DR?
The median is 100 × 90 mm, and 15% are two-layer designs.
What is the most popular open source board using the INA240A1DR?
By GitHub stars, ESC3Phase by odtu, with 2 stars.
Can I simulate one of these boards using the INA240A1DR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.