3 open source boards using the LM5176PWPR
Real designs built with the LM5176PWPR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Pd brick
enkhbold470
100 × 80 mm116 parts4LCERN-OHL-S-2.00ESP32
Pd brick
enkhbold470
100 × 80 mm116 parts4LCERN-OHL-S-2.00STM32
NX J401 Adapter
RealtimeRoboticsGroup
119.6 × 99.2 mm127 parts4LSHL-2.11
The LM5176PWPR in open source designs
The gallery holds 3 open source boards using the LM5176PWPR from 3 GitHub repositories; a typical one measures about 100 × 80 mm and carries around 116 components.
100% use four copper layers or more, and 67% carry an open source license.
The most starred is NX J401 Adapter by RealtimeRoboticsGroup.
Parts used alongside the LM5176PWPR
What boards using the LM5176PWPR are built for
LM5176PWPR: common questions
Where can I find a LM5176PWPR reference design?
Each of the 3 boards on this page is a real design using the LM5176PWPR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the LM5176PWPR?
The AP63203WU-7, ESP32-S3-WROOM-1-N8R8, INA228AIDGSR, MCP4725A0T-E/CH and MT3608 appear in the most repositories here.
Which microcontrollers do boards using the LM5176PWPR use?
Most are built on ESP32 (2) and STM32 (1).
How big is a typical board using the LM5176PWPR?
The median is 100 × 80 mm, and 0% are two-layer designs.
What is the most popular open source board using the LM5176PWPR?
By GitHub stars, NX J401 Adapter by RealtimeRoboticsGroup, with 1 stars.
Can I simulate one of these boards using the LM5176PWPR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.