2 open source boards using the LM51770DCPR
Real designs built with the LM51770DCPR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Odeck
KarpelesLab
130 × 89 mm772 parts6LCERN-OHL-P-2.00RP2040/RP2350
Odock
KarpelesLab
130 × 89 mm772 parts6LCERN-OHL-P-2.00
The LM51770DCPR in open source designs
The gallery holds 2 open source boards using the LM51770DCPR from 2 GitHub repositories; a typical one measures about 130 × 89 mm and carries around 772 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is Odeck by KarpelesLab.
Parts used alongside the LM51770DCPR
Microcontrollers on boards using the LM51770DCPR
LM51770DCPR: common questions
Where can I find a LM51770DCPR reference design?
Each of the 2 boards on this page is a real design using the LM51770DCPR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the LM51770DCPR?
The 74LVC1G17W5-7, AT24C512C-SSHD-T, CYPM1321-97BZXIT, INA226AIDGSR and INA237AIDGSR appear in the most repositories here.
Which microcontrollers do boards using the LM51770DCPR use?
Most are built on RP2040/RP2350 (2).
How big is a typical board using the LM51770DCPR?
The median is 130 × 89 mm, and 0% are two-layer designs.
What is the most popular open source board using the LM51770DCPR?
By GitHub stars, Odeck by KarpelesLab, with 0 stars.
Can I simulate one of these boards using the LM51770DCPR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.