5 open source boards using the LM5148RGYR

Real designs built with the LM5148RGYR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

The LM5148RGYR in open source designs

The gallery holds 5 open source boards using the LM5148RGYR from 5 GitHub repositories; a typical one measures about 149.3 × 106 mm and carries around 170 components.

75% use four copper layers or more, and 40% carry an open source license.

The most starred is PDB by Malcollm.

Microcontrollers on boards using the LM5148RGYR

LM5148RGYR: common questions

Where can I find a LM5148RGYR reference design?

Each of the 5 boards on this page is a real design using the LM5148RGYR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the LM5148RGYR?

The 74LVC1G17W5-7, AT24C512C-SSHD-T, CYPM1321-97BZXIT, ESP32-S3-WROOM-1 and INA226AIDGSR appear in the most repositories here.

Which microcontrollers do boards using the LM5148RGYR use?

Most are built on ESP32 (2) and RP2040/RP2350 (2).

How big is a typical board using the LM5148RGYR?

The median is 149.3 × 106 mm, and 25% are two-layer designs.

What is the most popular open source board using the LM5148RGYR?

By GitHub stars, PDB by Malcollm, with 4 stars.

Can I simulate one of these boards using the LM5148RGYR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part