5 open source boards using the INA237AIDGSR
Real designs built with the INA237AIDGSR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Odeck
KarpelesLab
130 × 89 mm772 parts6LCERN-OHL-P-2.00RP2040/RP2350
Odock
KarpelesLab
130 × 89 mm772 parts6LCERN-OHL-P-2.00STM32
Backplane Prototype
kquinsland
151.8 × 30.8 mm70 parts4LNo license0STM32
Mini Rack Power Carrier
kquinsland
100 × 34.9 mm61 parts4LNo license0ESP32
Esp32 ina237
HeyPCB
30 × 60 mm26 parts4LCERN-OHL-S-2.00
The INA237AIDGSR in open source designs
The gallery holds 5 open source boards using the INA237AIDGSR from 4 GitHub repositories; a typical one measures about 130 × 60 mm and carries around 70 components.
100% use four copper layers or more, and 60% carry an open source license.
The most starred is Odeck by KarpelesLab.
Parts used alongside the INA237AIDGSR
Microcontrollers on boards using the INA237AIDGSR
What boards using the INA237AIDGSR are built for
INA237AIDGSR: common questions
Where can I find a INA237AIDGSR reference design?
Each of the 5 boards on this page is a real design using the INA237AIDGSR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the INA237AIDGSR?
The 74LVC1G17W5-7, AT24C512C-SSHD-T, CYPM1321-97BZXIT, INA226AIDGSR and LM5148RGYR appear in the most repositories here.
Which microcontrollers do boards using the INA237AIDGSR use?
Most are built on RP2040/RP2350 (2), STM32 (2) and ESP32 (1).
How big is a typical board using the INA237AIDGSR?
The median is 130 × 60 mm, and 0% are two-layer designs.
What is the most popular open source board using the INA237AIDGSR?
By GitHub stars, Odeck by KarpelesLab, with 0 stars.
Can I simulate one of these boards using the INA237AIDGSR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.