7 open source boards using the AT24C512C-SSHD-T

Real designs built with the AT24C512C-SSHD-T, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the AT24C512C-SSHD-T

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the AT24C512C-SSHD-T connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a capacitor to GND on 4 of 5 designs, most often 100 nF (then 10 µF).
  • The A0 pin is tied to GND on 4 of 5 designs.
  • The A1 pin is tied to GND on 4 of 5 designs.
  • The A2 pin is tied to GND on 4 of 5 designs.
A0pin 1Connected to: GND 80% · a signal 20%
A1pin 2Connected to: GND 80% · a signal 20%
A2pin 3Connected to: GND 80% · a signal 20%
GNDpin 4Connected to: GND 100%
SDApin 5Connected to: A connector 40%, the microcontroller 40%, TPS26750SRSMR 40%
  • Pull-up to 3.3V on 40% · 1.8 kΩ (1), 4.7 kΩ (1)
  • Series resistor on 40% · 4.7 kΩ (2)
SCLpin 6Connected to: A connector 40%, the microcontroller 40%, TPS26750SRSMR 40%
  • Pull-up to 3.3V on 40% · 1.8 kΩ (1), 4.7 kΩ (1)
  • Series resistor on 40% · 4.7 kΩ (2)
WPpin 7Connected to: GND 80% · a signal 20%
VCCpin 8Connected to: TPD4S480RUKR 40%, TPS26750SRSMR 40% · 3.3V 40%
  • Capacitor to GND on 80% · 100 nF (4), 10 µF (2)
  • Series resistor on 40% · 4.7 kΩ (4), 100 kΩ (4)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include SamdFlightController by crnicholson, Rustypill pcb by Determinant, Com4bbb by eurovibes and Odeck by KarpelesLab.

The AT24C512C-SSHD-T in open source designs

The gallery holds 7 open source boards using the AT24C512C-SSHD-T from 5 GitHub repositories; a typical one measures about 54.6 × 87.9 mm and carries around 106 components.

86% use four copper layers or more, and 43% carry an open source license.

The most starred is StratoSoar-MK2.2 by crnicholson.

Microcontrollers on boards using the AT24C512C-SSHD-T

AT24C512C-SSHD-T: common questions

Where can I find a AT24C512C-SSHD-T reference design?

Each of the 7 boards on this page is a real design using the AT24C512C-SSHD-T. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the AT24C512C-SSHD-T VCC pin connected?

The VCC pin has a capacitor to GND on 4 of 5 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 5 open source designs using the AT24C512C-SSHD-T.

How is the AT24C512C-SSHD-T A0 pin connected?

The A0 pin is tied to GND on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the AT24C512C-SSHD-T.

How is the AT24C512C-SSHD-T A1 pin connected?

The A1 pin is tied to GND on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the AT24C512C-SSHD-T.

What parts are used alongside the AT24C512C-SSHD-T?

The 74LVC1G17W5-7, CYPM1321-97BZXIT, INA226AIDGSR, INA237AIDGSR and LM5148RGYR appear in the most repositories here.

Which microcontrollers do boards using the AT24C512C-SSHD-T use?

Most are built on Microchip SAM (3), RP2040/RP2350 (2), ESP32 (1) and ESP8266 (1).

How big is a typical board using the AT24C512C-SSHD-T?

The median is 54.6 × 87.9 mm, and 14% are two-layer designs.

What is the most popular open source board using the AT24C512C-SSHD-T?

By GitHub stars, StratoSoar-MK2.2 by crnicholson, with 24 stars.

Can I simulate one of these boards using the AT24C512C-SSHD-T before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part