9 open source boards using the LM74800QDRRRQ1
Real designs built with the LM74800QDRRRQ1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Power board v1
misko
100 × 65 mm133 parts4LNo license12Sirokko-26201-controller
krolbot
335 × 170 mm79 parts2LNo license1RP2040/RP2350
Odeck
KarpelesLab
130 × 89 mm772 parts6LCERN-OHL-P-2.00RP2040/RP2350
Odock
KarpelesLab
130 × 89 mm772 parts6LCERN-OHL-P-2.00ESP32
Eswitch
dpeckham
334 × 172 mm378 parts4LNo license0Microduck Power Regen R22
ldcyes
65 × 75 mm80 parts4LNo license0AVR/Arduino
Power board v1 krt experiment
misko
90 × 65 mm127 parts4LNo license12Backplane
mikesmitty
192 × 31.5 mm83 parts4LNo license3Microduck TDK Power R8
ldcyes
65 × 60 mm43 parts2LNo license0
How designs wire the LM74800QDRRRQ1
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the LM74800QDRRRQ1 connects to, and the resistors, capacitors and other passives placed on it.
- The SW_4 pin has a series resistor on 7 of 7 designs, most often 100 kΩ (then 887 kΩ).
- The VS_10 pin has a series capacitor on 7 of 7 designs, most often 100 nF (then 1 µF).
- The VS_10 pin has a capacitor to GND on 7 of 7 designs, most often 100 nF (then 1 µF).
- The C_12 pin has a series capacitor on 7 of 7 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| A_2pin 2 | Connected to: VBUS_PDIN 71% · a signal 29% | — |
| VSNS_3pin 3 | Connected to: VBUS_PDIN 57% · a signal 43% |
|
| SW_4pin 4 | Connected to: Signal 100% |
|
| OV_5pin 5 | Connected to: Signal 86% |
|
| EN/UVLO_6pin 6 | Connected to: A connector 29% |
|
| GND_7pin 7 | Connected to: GND 100% | — |
| HGATE_8pin 8 | Connected to: Signal 86% |
|
| OUT_9pin 9 | Connected to: Signal 57% · VIN_OR 43% |
|
| VS_10pin 10 | Connected to: Signal 86% |
|
| CAP_11pin 11 | Connected to: Signal 100% |
|
| C_12pin 12 | Connected to: Signal 86% |
|
| RTN_13pin 13 | Connected to: Not connected 100% | — |
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Power board v1 by misko, Backplane by mikesmitty, Sirokko-26201-controller by krolbot and Eswitch by dpeckham.
The LM74800QDRRRQ1 in open source designs
The gallery holds 9 open source boards using the LM74800QDRRRQ1 from 7 GitHub repositories; a typical one measures about 130 × 75 mm and carries around 127 components.
78% use four copper layers or more, and 22% carry an open source license.
The most starred is Power board v1 by misko.
Parts used alongside the LM74800QDRRRQ1
Microcontrollers on boards using the LM74800QDRRRQ1
What boards using the LM74800QDRRRQ1 are built for
LM74800QDRRRQ1: common questions
Where can I find a LM74800QDRRRQ1 reference design?
Each of the 9 boards on this page is a real design using the LM74800QDRRRQ1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the LM74800QDRRRQ1 SW_4 pin?
The SW_4 pin has a series resistor on 7 of 7 designs, most often 100 kΩ (then 887 kΩ). Counted from the KiCad layouts of 7 open source designs using the LM74800QDRRRQ1.
How is the LM74800QDRRRQ1 VS_10 pin connected?
The VS_10 pin has a series capacitor on 7 of 7 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 7 open source designs using the LM74800QDRRRQ1.
How is the LM74800QDRRRQ1 C_12 pin connected?
The C_12 pin has a series capacitor on 7 of 7 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 7 open source designs using the LM74800QDRRRQ1.
What parts are used alongside the LM74800QDRRRQ1?
The INA226AIDGSR, 74LVC1G17W5-7, AT24C512C-SSHD-T, CYPM1321-97BZXIT and INA237AIDGSR appear in the most repositories here.
Which microcontrollers do boards using the LM74800QDRRRQ1 use?
Most are built on AVR/Arduino (2), RP2040/RP2350 (2) and ESP32 (1).
How big is a typical board using the LM74800QDRRRQ1?
The median is 130 × 75 mm, and 22% are two-layer designs.
What is the most popular open source board using the LM74800QDRRRQ1?
By GitHub stars, Power board v1 by misko, with 12 stars.
Can I simulate one of these boards using the LM74800QDRRRQ1 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.