8 open source boards using the LMR51450SDRRR

Real designs built with the LMR51450SDRRR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

How designs wire the LMR51450SDRRR

Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the LMR51450SDRRR connects to, and the resistors, capacitors and other passives placed on it.

  • The BOOT pin has a series capacitor on 8 of 8 designs, most often 100 nF.
  • The FB pin has a resistor to GND on 8 of 8 designs, most often 7.15 kΩ (then 12.1 kΩ).
  • The SW pins have a series capacitor on 7 of 8 designs, most often 100 nF.
  • The SW pins have a inductor on 7 of 8 designs, most often 6.8 µH (then 15 µH).
SWpin 1, 2, 3Connected to: Signal 100%
  • Series capacitor on 88% · 100 nF (21)
  • Inductor on 88% · 6.8 µH (9), 15 µH (3), 3.3 µH (3)
BOOTpin 4Connected to: Signal 100%
  • Series capacitor on 100% · 100 nF (8)
PGpin 5Connected to: Not connected 63% · a signal 38%
RTpin 6Connected to: Not connected 50% · a signal 50%
  • Resistor to GND on 50% · 46.4 kΩ (1), 0 Ω (1), 82.5 kΩ (1)
FBpin 7Connected to: Signal 100%
  • Resistor to GND on 100% · 7.15 kΩ (3), 12.1 kΩ (1), 31.6 kΩ (1)
  • Series capacitor on 63% · 33 pF (4), 22 pF (1)
  • Series resistor on 63% · 100 kΩ (3), 1 kΩ (2), 10 kΩ (2)
  • Pull-up to 12V on 50% · 100 kΩ (3), 19.1 kΩ (1)
AGNDpin 8Connected to: GND 100%
ENpin 9Connected to: Signal 75% · VIN_AON 25%
  • Pull-up to 1.8V on 50% · 10 kΩ (1), 0 Ω (1), 100 kΩ (1)
  • Resistor to GND on 38% · 200 kΩ (1), 1 MΩ (1), 21.5 kΩ (1)
VINpin 10, 11, 12Connected to: VIN 63% · a signal 38%
  • Decoupling capacitor on 75% · 10 µF (39), 100 nF (20)
PGNDpin 13, 14, 15Connected to: GND 81% · not connected 19%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include SmartPrintCoreH7x by BoltzRnD, Base board by GeniePod, BUCK-CONVERTER-LMR51450 by Harshavar8jdm and Rover power distribution board by devkyber.

The LMR51450SDRRR in open source designs

The gallery holds 8 open source boards using the LMR51450SDRRR from 8 GitHub repositories; a typical one measures about 65.3 × 62.2 mm and carries around 82 components.

75% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is SmartPrintCoreH7x by BoltzRnD.

Parts used alongside the LMR51450SDRRR

Microcontrollers on boards using the LMR51450SDRRR

What boards using the LMR51450SDRRR are built for

LMR51450SDRRR: common questions

Where can I find a LMR51450SDRRR reference design?

Each of the 8 boards on this page is a real design using the LMR51450SDRRR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the LMR51450SDRRR BOOT pin connected?

The BOOT pin has a series capacitor on 8 of 8 designs, most often 100 nF. Counted from the KiCad layouts of 8 open source designs using the LMR51450SDRRR.

What resistor goes on the LMR51450SDRRR FB pin?

The FB pin has a resistor to GND on 8 of 8 designs, most often 7.15 kΩ (then 12.1 kΩ). Counted from the KiCad layouts of 8 open source designs using the LMR51450SDRRR.

How is the LMR51450SDRRR SW pin connected?

The SW pins have a series capacitor on 7 of 8 designs, most often 100 nF. Counted from the KiCad layouts of 8 open source designs using the LMR51450SDRRR.

What parts are used alongside the LMR51450SDRRR?

The STUSB4500QTR, TXS0102DQE and USBLC6-2SC6 appear in the most repositories here.

Which microcontrollers do boards using the LMR51450SDRRR use?

Most are built on Raspberry Pi (1), RP2040/RP2350 (1) and STM32 (1).

How big is a typical board using the LMR51450SDRRR?

The median is 65.3 × 62.2 mm, and 75% are two-layer designs.

What is the most popular open source board using the LMR51450SDRRR?

By GitHub stars, SmartPrintCoreH7x by BoltzRnD, with 89 stars.

Can I simulate one of these boards using the LMR51450SDRRR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part