6 open source boards using the TXS0102DQE
Real designs built with the TXS0102DQE, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
PS2 AIO Mainboard
tschicki
121 × 83 mm568 parts6LMIT202STM32
SmartPrintCoreH7x
BoltzRnD
170.1 × 96.9 mm530 parts2LGPL-3.089Base board
GeniePod
90 × 90 mm216 parts6LCERN-OHL-S-2.02RP2040/RP2350
Digirig icom
1vers1on
48.5 × 56 mm60 parts4LNo license1ESP32
Led button
GeniePod
90 × 90 mm116 parts2LCERN-OHL-S-2.02Nordic nRF
Lemon pcb wireless
rianadon
29.9 × 42 mm36 parts4LNo license41
How designs wire the TXS0102DQE
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TXS0102DQE connects to, and the resistors, capacitors and other passives placed on it.
- The VCCB pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 1 µF).
- The VCCA pin has a decoupling capacitor on 3 of 5 designs, most often 100 nF.
- The OE pin is tied to 2.7V on 3 of 5 designs (a signal on 2).
- The A1 pin has a series resistor on 2 of 5 designs, most often 68 Ω (then 10 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VCCApin 1 | Connected to: 3.3V 60% · a signal 40% |
|
| A1pin 2 | Connected to: The microcontroller 60% |
|
| A2pin 3 | Connected to: The microcontroller 40% · not connected 20% · GND 20% |
|
| GNDpin 4 | Connected to: GND 100% | — |
| OEpin 5 | Connected to: 2.7V 60% · a signal 40% | — |
| B2pin 6 | Connected to: Signal 80% · not connected 20% |
|
| VCCBpin 8 | Connected to: 3.3V 80% · a signal 20% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include PS2 AIO Mainboard by tschicki, SmartPrintCoreH7x by BoltzRnD, Lemon pcb wireless by rianadon and Base board by GeniePod.
The TXS0102DQE in open source designs
The gallery holds 6 open source boards using the TXS0102DQE from 5 GitHub repositories; a typical one measures about 90 × 86.5 mm and carries around 166 components.
67% use four copper layers or more, and 67% carry an open source license.
The most starred is PS2 AIO Mainboard by tschicki.
Parts used alongside the TXS0102DQE
Microcontrollers on boards using the TXS0102DQE
What boards using the TXS0102DQE are built for
TXS0102DQE: common questions
Where can I find a TXS0102DQE reference design?
Each of the 6 boards on this page is a real design using the TXS0102DQE. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the TXS0102DQE VCCB pin?
The VCCB pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the TXS0102DQE.
What decoupling capacitors do designs use on the TXS0102DQE VCCA pin?
The VCCA pin has a decoupling capacitor on 3 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the TXS0102DQE.
How is the TXS0102DQE OE pin connected?
The OE pin is tied to 2.7V on 3 of 5 designs (a signal on 2). Counted from the KiCad layouts of 5 open source designs using the TXS0102DQE.
Which microcontrollers do boards using the TXS0102DQE use?
Most are built on RP2040/RP2350 (2), ESP32 (1), Nordic nRF (1) and STM32 (1).
How big is a typical board using the TXS0102DQE?
The median is 90 × 86.5 mm, and 33% are two-layer designs.
What is the most popular open source board using the TXS0102DQE?
By GitHub stars, PS2 AIO Mainboard by tschicki, with 202 stars.
Can I simulate one of these boards using the TXS0102DQE before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.