6 open source boards using the LMR62421XMF

Real designs built with the LMR62421XMF, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the LMR62421XMF

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the LMR62421XMF connects to, and the resistors, capacitors and other passives placed on it.

  • The SW pin has a inductor on 6 of 6 designs, most often 8.2 µH (then 6.8 µH).
  • The FB pin has a resistor to GND on 6 of 6 designs, most often 10 kΩ (then 12 kΩ).
  • The FB pin has a pull-up to 12V on 5 of 6 designs, most often 100 kΩ (then 68.1 kΩ).
  • The FB pin has a capacitor to the supply on 5 of 6 designs, most often 220 pF (then 680 pF).
SWpin 1Connected to: Signal 100%
  • Inductor on 100% · 8.2 µH (2), 6.8 µH (1), 22 µH (1)
GNDpin 2Connected to: GND 100%
FBpin 3Connected to: Signal 100%
  • Resistor to GND on 100% · 10 kΩ (4), 12 kΩ (1), 10.2 kΩ (1)
  • Pull-up to 12V on 83% · 100 kΩ (1), 68.1 kΩ (1), 86.6 kΩ (1)
  • Capacitor to the supply on 83% · 220 pF (2), 680 pF (2), 560 pF (1)
ENpin 4Connected to: Signal 100%
  • Pull-up to VBUS on 67% · 10 kΩ (4)
  • Series resistor on 33% · 10 kΩ (1), 1 MΩ (1)
  • Resistor to GND on 33% · 10 kΩ (2)
VINpin 5Connected to: 5V 83% · a signal 17%
  • Inductor on 83% · 6.8 µH (1), 22 µH (1), 8.2 µH (1)
  • Decoupling capacitor on 50% · 10 µF (1), 4.7 µF (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Time2time by Resaj, Asynth2Osc by everedero, Seed3-DevKit-Desktop by daisyaudio and USB-Powered fan-Controller by FoxhoodDesigns.

The LMR62421XMF in open source designs

The gallery holds 6 open source boards using the LMR62421XMF from 6 GitHub repositories; a typical one measures about 71.8 × 88 mm and carries around 137 components.

67% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.

The most starred is Time2time by Resaj.

Microcontrollers on boards using the LMR62421XMF

LMR62421XMF: common questions

Where can I find a LMR62421XMF reference design?

Each of the 6 boards on this page is a real design using the LMR62421XMF. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the LMR62421XMF SW pin connected?

The SW pin has a inductor on 6 of 6 designs, most often 8.2 µH (then 6.8 µH). Counted from the KiCad layouts of 6 open source designs using the LMR62421XMF.

What resistor goes on the LMR62421XMF FB pin?

The FB pin has a resistor to GND on 6 of 6 designs, most often 10 kΩ (then 12 kΩ). Counted from the KiCad layouts of 6 open source designs using the LMR62421XMF.

How is the LMR62421XMF VIN pin connected?

The VIN pin has a inductor on 5 of 6 designs, most often 6.8 µH (then 22 µH). Counted from the KiCad layouts of 6 open source designs using the LMR62421XMF.

What parts are used alongside the LMR62421XMF?

The H11L1, USBLC6-2SC6, LAN8742A, Si1869DH and USBLC6-2P6 appear in the most repositories here.

Which microcontrollers do boards using the LMR62421XMF use?

Most are built on STM32 (2), AVR/Arduino (1) and ESP32 (1).

How big is a typical board using the LMR62421XMF?

The median is 71.8 × 88 mm, and 67% are two-layer designs.

What is the most popular open source board using the LMR62421XMF?

By GitHub stars, Time2time by Resaj, with 5 stars.

Can I simulate one of these boards using the LMR62421XMF before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part