8 open source boards using the LPS22HBTR
Real designs built with the LPS22HBTR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Home weather station esp32
Norbixix
60 × 33.5 mm44 parts4LNo license2RP2040/RP2350
Drone
WiktorKociuba
60.4 × 98.3 mm201 parts6LNo license0Hellen72 NB2
rusefi
154 × 159 mm175 parts2LNo license0STM32
ACwing FC A
andrea-cirillo
40.8 × 40.8 mm97 parts4LNo license0STM32
ACwing FC A
andrea-cirillo
40.8 × 40.8 mm97 parts4LNo license0STM32
CpuAddOn
logisim-evolution
60.6 × 100 mm138 parts6LMIT18STM32
ACwing Flow A
andrea-cirillo
21 × 25 mm30 parts2LNo license0STM32
ACwing Flow A
andrea-cirillo
21 × 25 mm30 parts2LNo license0
How designs wire the LPS22HBTR
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the LPS22HBTR connects to, and the resistors, capacitors and other passives placed on it.
- The VDD_IO pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 10 µF).
- The VDD pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 10 µF).
- The RESERVED pin is tied to GND on 6 of 6 designs.
- The CS pin is tied to 3.3V on 5 of 6 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDD_IOpin 1 | Connected to: 3.3V 100% |
|
| SCL/SPCpin 2 | Connected to: IIS2MDCTR 33%, LSM6DSV16XTR 33% |
|
| RESERVEDpin 3 | Connected to: GND 100% | — |
| SDA/SDI/SDOpin 4 | Connected to: IIS2MDCTR 33%, LSM6DSV16XTR 33% |
|
| SDO/SA0pin 5 | Connected to: GND 50% · VDD 33% · a signal 17% |
|
| CSpin 6 | Connected to: 3.3V 83% · a signal 17% | — |
| INT_DRDYpin 7 | Connected to: Not connected 67% · a signal 33% | — |
| GNDpin 8, 9 | Connected to: GND 100% | — |
| VDDpin 10 | Connected to: 3.3V 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include CpuAddOn by logisim-evolution, Home weather station esp32 by Norbixix, ACwing FC A by andrea-cirillo and ACwing FC A by andrea-cirillo.
The LPS22HBTR in open source designs
The gallery holds 8 open source boards using the LPS22HBTR from 6 GitHub repositories; a typical one measures about 50.4 × 40.8 mm and carries around 97 components.
63% use four copper layers or more, and 13% carry an open source license.
The most starred is CpuAddOn by logisim-evolution.
Parts used alongside the LPS22HBTR
Microcontrollers on boards using the LPS22HBTR
What boards using the LPS22HBTR are built for
LPS22HBTR: common questions
Where can I find a LPS22HBTR reference design?
Each of the 8 boards on this page is a real design using the LPS22HBTR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the LPS22HBTR VDD_IO pin?
The VDD_IO pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 6 open source designs using the LPS22HBTR.
What decoupling capacitors do designs use on the LPS22HBTR VDD pin?
The VDD pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 6 open source designs using the LPS22HBTR.
How is the LPS22HBTR RESERVED pin connected?
The RESERVED pin is tied to GND on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the LPS22HBTR.
What parts are used alongside the LPS22HBTR?
The IIS2MDCTR, LD39130SPUR, LDK130PU-R, LM5166DRCT and LSM6DSV16XTR appear in the most repositories here.
Which microcontrollers do boards using the LPS22HBTR use?
Most are built on STM32 (5), ESP32 (1) and RP2040/RP2350 (1).
How big is a typical board using the LPS22HBTR?
The median is 50.4 × 40.8 mm, and 38% are two-layer designs.
What is the most popular open source board using the LPS22HBTR?
By GitHub stars, CpuAddOn by logisim-evolution, with 18 stars.
Can I simulate one of these boards using the LPS22HBTR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.