4 open source boards using the LSM6DSOWTR

Real designs built with the LSM6DSOWTR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The LSM6DSOWTR in open source designs

The gallery holds 4 open source boards using the LSM6DSOWTR from 4 GitHub repositories; a typical one measures about 65.4 × 68 mm and carries around 190 components.

67% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is Cm4 motherboard by Twisted-Fields.

Microcontrollers on boards using the LSM6DSOWTR

LSM6DSOWTR: common questions

Where can I find a LSM6DSOWTR reference design?

Each of the 4 boards on this page is a real design using the LSM6DSOWTR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the LSM6DSOWTR?

The USBLC6-2P6, ADS1115IDGSR, CA-IS3050G, ET6226M and FJ5461AH appear in the most repositories here.

Which microcontrollers do boards using the LSM6DSOWTR use?

Most are built on Raspberry Pi (2) and ESP32 (1).

How big is a typical board using the LSM6DSOWTR?

The median is 65.4 × 68 mm, and 67% are two-layer designs.

What is the most popular open source board using the LSM6DSOWTR?

By GitHub stars, Cm4 motherboard by Twisted-Fields, with 81 stars.

Can I simulate one of these boards using the LSM6DSOWTR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part