8 open source boards using the TCAN330GDCNT
Real designs built with the TCAN330GDCNT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
OreSat Battery Card
oresat
99.8 × 94.6 mm267 parts4LNo license27Oresat c3-hardware
oresat
99.8 × 94.6 mm347 parts4LCERN-OHL-S-2.026STM32
Oresat adcs card
oresat
99.8 × 94.6 mm579 parts4LGPL-2.021OreSat CFC Processor Card
oresat
99.8 × 94.6 mm163 parts4LCERN-OHL-S-2.02STM32
Oresat batteries
BrownSpaceEngineering
88 × 84.9 mm304 parts4LNo license0- schematic only · 503 parts
Hwsec netlist scanner
srisowmya2000
503 partsNo license0 STM32
1u panel
oresat
83 × 100 mm109 parts2LNo license25STM32
Controller rev5.0 flat
oresat
100 × 100 mm198 parts4LGPL-2.021
How designs wire the TCAN330GDCNT
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the TCAN330GDCNT connects to, and the resistors, capacitors and other passives placed on it.
- The VCC_3 pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 22 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GND_2pin 2 | Connected to: GND 83% · a signal 17% | — |
| VCC_3pin 3 | Connected to: 3.3V 83% · a signal 17% |
|
6 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include OreSat Battery Card by oresat, Oresat c3-hardware by oresat, 1u panel by oresat and Controller rev5.0 flat by oresat.
The TCAN330GDCNT in open source designs
The gallery holds 8 open source boards using the TCAN330GDCNT from 7 GitHub repositories; a typical one measures about 99.8 × 94.6 mm and carries around 286 components.
86% use four copper layers or more, and 50% carry an open source license.
The most starred is OreSat Battery Card by oresat.
Parts used alongside the TCAN330GDCNT
Microcontrollers on boards using the TCAN330GDCNT
What boards using the TCAN330GDCNT are built for
TCAN330GDCNT: common questions
Where can I find a TCAN330GDCNT reference design?
Each of the 8 boards on this page is a real design using the TCAN330GDCNT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the TCAN330GDCNT VCC_3 pin?
The VCC_3 pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 22 µF). Counted from the KiCad layouts of 6 open source designs using the TCAN330GDCNT.
What parts are used alongside the TCAN330GDCNT?
The MAX4211FETE, TS5A21366DCUR, LTC3624IDD-5#PBF, MIC842LYC5-TR and RCLAMP0504FBTCT appear in the most repositories here.
Which microcontrollers do boards using the TCAN330GDCNT use?
Most are built on STM32 (4).
How big is a typical board using the TCAN330GDCNT?
The median is 99.8 × 94.6 mm, and 14% are two-layer designs.
What is the most popular open source board using the TCAN330GDCNT?
By GitHub stars, OreSat Battery Card by oresat, with 27 stars.
Can I simulate one of these boards using the TCAN330GDCNT before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.