5 open source boards using the MC6821

Real designs built with the MC6821, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the MC6821

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the MC6821 connects to, and the resistors, capacitors and other passives placed on it.

  • The CS1 pin is tied to 5V on 5 of 5 designs.
  • The VCC pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 10 nF).
  • The RESET pin has a capacitor to GND on 4 of 5 designs, most often 1 µF (then 100 nF).
  • The PA0 pin has a capacitor to GND on 3 of 5 designs, most often 10 nF.
VSSpin 1Connected to: GND 100%
PA0pin 2Connected to: A connector 60%
  • Capacitor to GND on 60% · 10 nF (3)
  • Inductor on 60% · 3.3 µH (3)
PA1pin 3Connected to: A connector 60%
  • Capacitor to GND on 60% · 10 nF (3)
  • Inductor on 60% · 3.3 µH (3)
PA2pin 4Connected to: A connector 60%
  • Capacitor to GND on 40% · 10 nF (2)
  • Inductor on 40% · 3.3 µH (2)
PA3pin 5Connected to: A connector 60%
  • Capacitor to GND on 40% · 10 nF (2)
  • Inductor on 40% · 3.3 µH (2)
PA7pin 9Connected to: LM393P 60% · VCC 20%
  • Pull-up to 5V on 60% · 1 kΩ (3)
  • Series resistor on 60% · 10 MΩ (3)
VCCpin 20Connected to: 5V 100%
  • Decoupling capacitor on 80% · 100 nF (2), 10 nF (2)
CS0pin 22Connected to: 5V 60% · a signal 40%
CS1pin 24Connected to: 5V 100%
RESETpin 34Connected to: MC6809E 60%, a connector 40%, MC6821 40%
  • Capacitor to GND on 80% · 1 µF (2), 100 nF (1), 100 µF (1)
  • Pull-up to 5V on 60% · 100 kΩ (2), 3.3 kΩ (1)
IRQBpin 37Connected to: MC6809E 60% · not connected 40%
  • Pull-up to 5V on 60% · 4.7 kΩ (3)
IRQApin 38Connected to: MC6809E 60% · not connected 40%
  • Pull-up to 5V on 60% · 4.7 kΩ (3)

28 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include RC6502 Terminal by tebl, Dragon32Issue2 by jimbro1000, RC6802 CPU by tebl and Dragon32Rev3 by jimbro1000.

The MC6821 in open source designs

The gallery holds 5 open source boards using the MC6821 from 5 GitHub repositories; a typical one measures about 253 × 169.1 mm and carries around 169 components.

100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.

The most starred is RC6502 Terminal by tebl.

Microcontrollers on boards using the MC6821

What boards using the MC6821 are built for

MC6821: common questions

Where can I find a MC6821 reference design?

Each of the 5 boards on this page is a real design using the MC6821. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the MC6821 CS1 pin connected?

The CS1 pin is tied to 5V on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the MC6821.

What decoupling capacitors do designs use on the MC6821 VCC pin?

The VCC pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 5 open source designs using the MC6821.

How is the MC6821 RESET pin connected?

The RESET pin has a capacitor to GND on 4 of 5 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 5 open source designs using the MC6821.

What parts are used alongside the MC6821?

The 74LS02N, 74LS244N, LM393P, MC14050BCP and MC14529B appear in the most repositories here.

Which microcontrollers do boards using the MC6821 use?

Most are built on AVR/Arduino (1).

How big is a typical board using the MC6821?

The median is 253 × 169.1 mm, and 100% are two-layer designs.

What is the most popular open source board using the MC6821?

By GitHub stars, RC6502 Terminal by tebl, with 192 stars.

Can I simulate one of these boards using the MC6821 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part