4 open source boards using the MCP23S17-E/SP

Real designs built with the MCP23S17-E/SP, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The MCP23S17-E/SP in open source designs

The gallery holds 4 open source boards using the MCP23S17-E/SP from 4 GitHub repositories; a typical one measures about 208 × 135 mm and carries around 313 components.

75% use four copper layers or more, and 75% carry an open source license.

The most starred is Central control unit by RomLab.

Microcontrollers on boards using the MCP23S17-E/SP

What boards using the MCP23S17-E/SP are built for

MCP23S17-E/SP: common questions

Where can I find a MCP23S17-E/SP reference design?

Each of the 4 boards on this page is a real design using the MCP23S17-E/SP. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the MCP23S17-E/SP?

The AS6C1008-55PCN, ATF22V10B/C, Raspberry Pi Pico 2 W, SN74AHCT244N and SN74AHCT245N Pico-to-bus appear in the most repositories here.

Which microcontrollers do boards using the MCP23S17-E/SP use?

Most are built on RP2040/RP2350 (2), ESP32 (1) and Raspberry Pi (1).

How big is a typical board using the MCP23S17-E/SP?

The median is 208 × 135 mm, and 25% are two-layer designs.

What is the most popular open source board using the MCP23S17-E/SP?

By GitHub stars, Central control unit by RomLab, with 1 stars.

Can I simulate one of these boards using the MCP23S17-E/SP before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part