5 open source boards using the Raspberry Pi Pico 2 W
Real designs built with the Raspberry Pi Pico 2 W, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
SVI-3x8 PicoExpander
fitch
150 × 38 mm14 parts2LMIT12RP2040/RP2350
Z80ROMlessSBC
gloveboxes
160 × 135 mm51 parts4LMIT1RP2040/RP2350
Pcb z80
gloveboxes
160 × 135 mm51 parts4LMIT0RP2040/RP2350
PCB-Demo
ftCornel
53 × 52 mm11 parts2LNo license0- schematic only · 25 partsRP2040/RP2350
Usbscsi
cm68
25 partsNo license0
The Raspberry Pi Pico 2 W in open source designs
The gallery holds 5 open source boards using the Raspberry Pi Pico 2 W from 5 GitHub repositories; a typical one measures about 155 × 93.5 mm and carries around 25 components.
50% are two-layer designs, the rest use four layers or more, and 60% carry an open source license.
The most starred is SVI-3x8 PicoExpander by fitch.
Parts used alongside the Raspberry Pi Pico 2 W
Microcontrollers on boards using the Raspberry Pi Pico 2 W
What boards using the Raspberry Pi Pico 2 W are built for
Raspberry Pi Pico 2 W: common questions
Where can I find a Raspberry Pi Pico 2 W reference design?
Each of the 5 boards on this page is a real design using the Raspberry Pi Pico 2 W. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the Raspberry Pi Pico 2 W?
The 74LVC245A, AS6C1008-55PCN, ATF22V10B/C, MCP23S17-E/SP and SN74AHCT244N appear in the most repositories here.
Which microcontrollers do boards using the Raspberry Pi Pico 2 W use?
Most are built on RP2040/RP2350 (5).
How big is a typical board using the Raspberry Pi Pico 2 W?
The median is 155 × 93.5 mm, and 50% are two-layer designs.
What is the most popular open source board using the Raspberry Pi Pico 2 W?
By GitHub stars, SVI-3x8 PicoExpander by fitch, with 12 stars.
Can I simulate one of these boards using the Raspberry Pi Pico 2 W before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.