11 open source boards using the AS6C1008-55PCN
Real designs built with the AS6C1008-55PCN, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Vic2020mainboard
danwerner21
357.8 × 124.5 mm127 parts2LNo license78L-Star
jacgoudsmit
99.7 × 80 mm51 parts2LMIT57AVR/Arduino
OtterX
RetroRemake
170.1 × 170.1 mm168 parts4LCERN-OHL-W-2.040AVR/Arduino
Sbc 8088
miselin
243.8 × 243.8 mm206 parts4LCERN-OHL-P-2.02RP2040/RP2350
Z80ROMlessSBC
gloveboxes
160 × 135 mm51 parts4LMIT1ESP8266
ZX-Max-128-Issue-3
liveboxandy
213 × 84.8 mm164 parts2LNo license0ESP8266
ZX-Max-128-Issue-3A
liveboxandy
213 × 84.8 mm162 parts2LNo license0RP2040/RP2350
Pcb z80
gloveboxes
160 × 135 mm51 parts4LMIT0Tkmem128-ii
lrrosa
78.7 × 66 mm19 parts4LCERN-OHL-S-2.00Prototype 8088
miselin
144.8 × 184.1 mm69 parts4LCERN-OHL-P-2.02Zx2 mem
krzys9876
101 × 69.9 mm20 parts2LMIT2
How designs wire the AS6C1008-55PCN
Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the AS6C1008-55PCN connects to, and the resistors, capacitors and other passives placed on it.
- The NC_1 pin is left unconnected on 9 of 10 designs.
- The CE2_30 pin is tied to 5V on 9 of 10 designs.
- The VCC pin has a decoupling capacitor on 7 of 10 designs, most often 100 nF.
- The A16 pin is tied to GND on 6 of 10 designs (a signal on 4).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| NC_1pin 1 | Connected to: Not connected 90% | — |
| A16pin 2 | Connected to: GND 60% · a signal 40% | — |
| A14pin 3 | Connected to: A connector 30%, MCP23S17-E/SP 20%, Z84C0020PEC 20% |
|
| A12pin 4 | Connected to: A connector 60%, MCP23S17-E/SP 20%, Z84C0020PEC 20% |
|
| A7pin 5 | Connected to: A connector 50%, MCP23S17-E/SP 20%, Z84C0020PEC 20% |
|
| A6pin 6 | Connected to: A connector 50%, MCP23S17-E/SP 20%, Z84C0020PEC 20% |
|
| A5pin 7 | Connected to: A connector 50%, MCP23S17-E/SP 20%, Z84C0020PEC 20% |
|
| A4pin 8 | Connected to: A connector 50%, MCP23S17-E/SP 20%, Z84C0020PEC 20% |
|
| A3pin 9 | Connected to: A connector 60%, MCP23S17-E/SP 20%, Z84C0020PEC 20% |
|
| A2pin 10 | Connected to: A connector 60%, MCP23S17-E/SP 20%, Z84C0020PEC 20% |
|
| A1pin 11 | Connected to: A connector 30%, MCP23S17-E/SP 20%, Z84C0020PEC 20% |
|
| A0pin 12 | Connected to: A connector 30%, MCP23S17-E/SP 20%, Z84C0020PEC 20% |
|
| DQ0_13pin 13 | Connected to: A connector 30%, Z84C0020PEC 20%, the microcontroller 20% |
|
| DQ1_14pin 14 | Connected to: A connector 30%, Z84C0020PEC 20%, the microcontroller 20% |
|
| DQ2_15pin 15 | Connected to: A connector 30%, Z84C0020PEC 20%, the microcontroller 20% |
|
| VSS_16pin 16 | Connected to: GND 100% | — |
| DQ3_17pin 17 | Connected to: A connector 30%, Z84C0020PEC 20%, the microcontroller 20% |
|
| DQ4_18pin 18 | Connected to: A connector 30%, Z84C0020PEC 20%, the microcontroller 20% |
|
| DQ5_19pin 19 | Connected to: A connector 30%, Z84C0020PEC 20%, the microcontroller 20% |
|
| DQ6_20pin 20 | Connected to: A connector 30%, Z84C0020PEC 20%, the microcontroller 20% |
|
| DQ7_21pin 21 | Connected to: A connector 30%, Z84C0020PEC 20%, the microcontroller 20% |
|
| A10pin 23 | Connected to: A connector 60%, MCP23S17-E/SP 20%, Z84C0020PEC 20% |
|
| A11pin 25 | Connected to: A connector 60%, MCP23S17-E/SP 20%, Z84C0020PEC 20% |
|
| A9pin 26 | Connected to: A connector 60%, MCP23S17-E/SP 20%, Z84C0020PEC 20% |
|
| A8pin 27 | Connected to: A connector 60%, MCP23S17-E/SP 20%, Z84C0020PEC 20% |
|
| A13pin 28 | Connected to: A connector 60%, MCP23S17-E/SP 20%, Z84C0020PEC 20% |
|
| CE2_30pin 30 | Connected to: 5V 90% | — |
| A15pin 31 | Connected to: A connector 30%, MCP23S17-E/SP 20%, Z84C0020PEC 20% |
|
| VCCpin 32 | Connected to: 5V 100% |
|
3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Vic2020mainboard by danwerner21, L-Star by jacgoudsmit, OtterX by RetroRemake and Zx2 mem by krzys9876.
The AS6C1008-55PCN in open source designs
The gallery holds 11 open source boards using the AS6C1008-55PCN from 10 GitHub repositories; a typical one measures about 160 × 124.5 mm and carries around 69 components.
55% use four copper layers or more, and 73% carry an open source license.
The most starred is Vic2020mainboard by danwerner21.
Parts used alongside the AS6C1008-55PCN
Microcontrollers on boards using the AS6C1008-55PCN
What boards using the AS6C1008-55PCN are built for
AS6C1008-55PCN: common questions
Where can I find a AS6C1008-55PCN reference design?
Each of the 11 boards on this page is a real design using the AS6C1008-55PCN. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the AS6C1008-55PCN NC_1 pin connected?
The NC_1 pin is left unconnected on 9 of 10 designs. Counted from the KiCad layouts of 10 open source designs using the AS6C1008-55PCN.
How is the AS6C1008-55PCN CE2_30 pin connected?
The CE2_30 pin is tied to 5V on 9 of 10 designs. Counted from the KiCad layouts of 10 open source designs using the AS6C1008-55PCN.
What decoupling capacitors do designs use on the AS6C1008-55PCN VCC pin?
The VCC pin has a decoupling capacitor on 7 of 10 designs, most often 100 nF. Counted from the KiCad layouts of 10 open source designs using the AS6C1008-55PCN.
What parts are used alongside the AS6C1008-55PCN?
The 74HC04, 3V3 1Amp, 7406, 74LS02 and 74LS138 appear in the most repositories here.
Which microcontrollers do boards using the AS6C1008-55PCN use?
Most are built on AVR/Arduino (2), ESP8266 (2) and RP2040/RP2350 (2).
How big is a typical board using the AS6C1008-55PCN?
The median is 160 × 124.5 mm, and 45% are two-layer designs.
What is the most popular open source board using the AS6C1008-55PCN?
By GitHub stars, Vic2020mainboard by danwerner21, with 78 stars.
Can I simulate one of these boards using the AS6C1008-55PCN before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.