5 open source boards using the Z84C0020PEC

Real designs built with the Z84C0020PEC, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the Z84C0020PEC

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the Z84C0020PEC connects to, and the resistors, capacitors and other passives placed on it.

  • The HALT_18 pin is left unconnected on 4 of 5 designs.
  • The RFSH_28 pin is left unconnected on 4 of 5 designs.
  • The A11_1 pin has a pull-up to 5V on 3 of 5 designs, most often 2.2 kΩ.
  • The INT_16 pin has a pull-up to 5V on 3 of 5 designs, most often 10 kΩ.
A11_1pin 1Connected to: AS6C1008-55PCN 40%, MCP23S17-E/SP 40%
  • Pull-up to 5V on 60% · 2.2 kΩ (1)
A12_2pin 2Connected to: AS6C1008-55PCN 40%, MCP23S17-E/SP 40%
  • Pull-up to 5V on 40%
A13_3pin 3Connected to: AS6C1008-55PCN 40%, MCP23S17-E/SP 40%
  • Pull-up to 5V on 40%
A14_4pin 4Connected to: AS6C1008-55PCN 40%, MCP23S17-E/SP 40%
  • Pull-up to 5V on 40%
A15_5pin 5Connected to: AS6C1008-55PCN 40%, MCP23S17-E/SP 40%
  • Pull-up to 5V on 40%
D4_7pin 7Connected to: AS6C1008-55PCN 40%, the microcontroller 40%
  • Series resistor on 40% · 470 Ω (1), 200 Ω (1)
D3_8pin 8Connected to: AS6C1008-55PCN 40%, the microcontroller 40%
  • Series resistor on 40% · 470 Ω (1), 200 Ω (1)
D5_9pin 9Connected to: AS6C1008-55PCN 40%, the microcontroller 40%
  • Series resistor on 40% · 470 Ω (1), 200 Ω (1)
D6_10pin 10Connected to: AS6C1008-55PCN 40%, the microcontroller 40%
  • Series resistor on 40% · 470 Ω (1), 200 Ω (1)
VCC_11pin 11Connected to: 5V 80% · not connected 20%
INT_16pin 16Connected to: Signal 100%
  • Pull-up to 5V on 60% · 10 kΩ (1)
NMI_17pin 17Connected to: Signal 60% · not connected 20% · 5V 20%
  • Pull-up to 5V on 60% · 10 kΩ (1)
HALT_18pin 18Connected to: Not connected 80% · a signal 20%
MREQ_19pin 19Connected to: ATF22V10B/C 40%
  • Pull-up to 5V on 40%
IORQ_20pin 20Connected to: ATF22V10B/C 40%, SN74LVC244AN 40% · not connected 40%
  • Pull-up to 5V on 40%
RD_21pin 21Connected to: ATF22V10B/C 40%, SN74LVC244AN 40% · 3.3V 20%
  • Pull-up to 5V on 40%
WR_22pin 22Connected to: ATF22V10B/C 40%, SN74LVC244AN 40% · 3.3V 20%
  • Pull-up to 5V on 40%
BUSACK_23pin 23Connected to: ATF22V10B/C 40%, SN74LVC244AN 40% · not connected 40%
  • Pull-up to 5V on 40%
WAIT_24pin 24Connected to: ATF22V10B/C 40% · 5V 40%
  • Pull-up to 5V on 40%
BUSRQ_25pin 25Connected to: SN74AHCT244N 40% · 5V 40%
  • Pull-up to 5V on 40%
RESET_26pin 26Connected to: The microcontroller 60%, ATF22V10B/C 40% · GND 20%
  • Resistor to GND on 60% · 4.7 kΩ (2), 10 kΩ (1)
M1_27pin 27Connected to: Signal 100%
  • Series resistor on 40% · 470 Ω (1), 1 kΩ (1)
RFSH_28pin 28Connected to: Not connected 80% · a signal 20%
GND_29pin 29Connected to: GND 80% · a signal 20%
A0_30pin 30Connected to: AS6C1008-55PCN 40%, MCP23S17-E/SP 40%
  • Pull-up to 5V on 40%
A1_31pin 31Connected to: AS6C1008-55PCN 40%, MCP23S17-E/SP 40%
  • Pull-up to 5V on 40%
A2_32pin 32Connected to: AS6C1008-55PCN 40%, MCP23S17-E/SP 40%
  • Pull-up to 5V on 40%
A3_33pin 33Connected to: AS6C1008-55PCN 40%, MCP23S17-E/SP 40% · not connected 20%
  • Pull-up to 5V on 40%
A4_34pin 34Connected to: AS6C1008-55PCN 40%, MCP23S17-E/SP 40%
  • Pull-up to 5V on 40%
A5_35pin 35Connected to: AS6C1008-55PCN 40%, MCP23S17-E/SP 40%
  • Pull-up to 5V on 40%
A6_36pin 36Connected to: AS6C1008-55PCN 40%, MCP23S17-E/SP 40%
  • Pull-up to 5V on 40%
A7_37pin 37Connected to: AS6C1008-55PCN 40%, MCP23S17-E/SP 40%
  • Pull-up to 5V on 40%
A8_38pin 38Connected to: AS6C1008-55PCN 40%, MCP23S17-E/SP 40%
  • Pull-up to 5V on 40%
A9_39pin 39Connected to: AS6C1008-55PCN 40%, MCP23S17-E/SP 40% · not connected 20%
  • Pull-up to 5V on 40%
A10_40pin 40Connected to: AS6C1008-55PCN 40%, MCP23S17-E/SP 40%
  • Pull-up to 5V on 40%

5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Zx sizif xxs by UzixLS, Zx sizif-512-ext by UzixLS, Dino z80 by rh1tech and Z80ROMlessSBC by gloveboxes.

The Z84C0020PEC in open source designs

The gallery holds 5 open source boards using the Z84C0020PEC from 5 GitHub repositories; a typical one measures about 160 × 80 mm and carries around 90 components.

60% use four copper layers or more, and 100% carry an open source license.

The most starred is Zx sizif xxs by UzixLS.

Microcontrollers on boards using the Z84C0020PEC

What boards using the Z84C0020PEC are built for

Z84C0020PEC: common questions

Where can I find a Z84C0020PEC reference design?

Each of the 5 boards on this page is a real design using the Z84C0020PEC. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the Z84C0020PEC HALT_18 pin connected?

The HALT_18 pin is left unconnected on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the Z84C0020PEC.

How is the Z84C0020PEC RFSH_28 pin connected?

The RFSH_28 pin is left unconnected on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the Z84C0020PEC.

What pull-up resistor is used on the Z84C0020PEC A11_1 pin?

The A11_1 pin has a pull-up to 5V on 3 of 5 designs, most often 2.2 kΩ. Counted from the KiCad layouts of 5 open source designs using the Z84C0020PEC.

What parts are used alongside the Z84C0020PEC?

The AS6C1008-55PCN, ATF22V10B/C, MCP23S17-E/SP, Raspberry Pi Pico 2 W and SN74AHCT244N appear in the most repositories here.

Which microcontrollers do boards using the Z84C0020PEC use?

Most are built on RP2040/RP2350 (3).

How big is a typical board using the Z84C0020PEC?

The median is 160 × 80 mm, and 40% are two-layer designs.

What is the most popular open source board using the Z84C0020PEC?

By GitHub stars, Zx sizif xxs by UzixLS, with 49 stars.

Can I simulate one of these boards using the Z84C0020PEC before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part