9 open source boards using the MCP23S17_SS

Real designs built with the MCP23S17_SS, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

9 boardsClear filters|Most starred

How designs wire the MCP23S17_SS

Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the MCP23S17_SS connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD pin has a decoupling capacitor on 6 of 8 designs, most often 100 nF (then 1 µF).
  • The A1 pin is tied to GND on 6 of 8 designs (a signal on 2).
  • The INTB pin is left unconnected on 6 of 8 designs (a signal on 2).
  • The A0 pin is tied to GND on 5 of 8 designs (a signal on 2).
GPB0pin 1Connected to: Signal 100%
  • Series resistor on 50% · 560 Ω (1), 100 Ω (1), 75 kΩ (1)
GPB1pin 2Connected to: Signal 100%
  • Series resistor on 38% · 560 Ω (1), 100 Ω (1), 1 kΩ (1)
GPB3pin 4Connected to: Signal 100%
  • Series resistor on 38% · 560 Ω (1), 100 Ω (1), 75 kΩ (1)
VDDpin 9Connected to: 5V 100%
  • Decoupling capacitor on 75% · 100 nF (4), 1 µF (1)
VSSpin 10Connected to: GND 100%
SOpin 14Connected to: MCP23S17_SS 38%
  • Series resistor on 38% · 22 Ω (2), 33 Ω (1)
A0pin 15Connected to: GND 63% · a signal 25%
A1pin 16Connected to: GND 75% · a signal 25%
INTBpin 19Connected to: Not connected 75% · a signal 25%
INTApin 20Connected to: Not connected 63% · a signal 38%
GPA0pin 21Connected to: Signal 88%
  • Series resistor on 38% · 560 Ω (1), 100 Ω (1), 22 Ω (1)
GPA1pin 22Connected to: Signal 88%
  • Series resistor on 38% · 560 Ω (1), 100 Ω (1), 22 Ω (1)
GPA2pin 23Connected to: Signal 100%
  • Series resistor on 50% · 560 Ω (1), 100 Ω (1), 75 kΩ (1)
GPA3pin 24Connected to: Signal 100%
  • Series resistor on 38% · 560 Ω (1), 100 Ω (1), 22 Ω (1)
GPA4pin 25Connected to: Signal 100%
  • Series resistor on 38% · 560 Ω (1), 100 Ω (1), 22 Ω (1)
GPA5pin 26Connected to: Signal 88%
  • Series resistor on 38% · 560 Ω (1), 100 Ω (1), 75 kΩ (1)

12 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Bkm-10rlternative by skumlos, Dodo keyboard by gorbit99, Bmcv by Bemeier and HackerDAQ Digital IO Card by multiplemonomials.

The MCP23S17_SS in open source designs

The gallery holds 9 open source boards using the MCP23S17_SS from 8 GitHub repositories; a typical one measures about 96.9 × 108 mm and carries around 244 components.

56% use four copper layers or more, and 22% carry an open source license.

The most starred is Bkm-10rlternative by skumlos.

Parts used alongside the MCP23S17_SS

Microcontrollers on boards using the MCP23S17_SS

MCP23S17_SS: common questions

Where can I find a MCP23S17_SS reference design?

Each of the 9 boards on this page is a real design using the MCP23S17_SS. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the MCP23S17_SS VDD pin?

The VDD pin has a decoupling capacitor on 6 of 8 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 8 open source designs using the MCP23S17_SS.

How is the MCP23S17_SS A1 pin connected?

The A1 pin is tied to GND on 6 of 8 designs (a signal on 2). Counted from the KiCad layouts of 8 open source designs using the MCP23S17_SS.

How is the MCP23S17_SS INTB pin connected?

The INTB pin is left unconnected on 6 of 8 designs (a signal on 2). Counted from the KiCad layouts of 8 open source designs using the MCP23S17_SS.

Which microcontrollers do boards using the MCP23S17_SS use?

Most are built on STM32 (2), AVR/Arduino (1), ESP32 (1) and Nordic nRF (1).

How big is a typical board using the MCP23S17_SS?

The median is 96.9 × 108 mm, and 44% are two-layer designs.

What is the most popular open source board using the MCP23S17_SS?

By GitHub stars, Bkm-10rlternative by skumlos, with 15 stars.

Can I simulate one of these boards using the MCP23S17_SS before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part